Deploying VMware OVA Virtual Machine

Deploying IP Fabric OVA Image

The virtual appliance image is available at https://releases.ipfabric.io/ipfabric/#current

Access to OVA image is restricted to registered customers only. Please contact our sales representative if you are interested in a trial of IP Fabric.

Deploy And Configure VM

Please bear in mind that IP Fabric uses CLI access (SSH or telnet) to connect to devices for data collection. It's important to place the VM in the proper network segment to prevent high ACL or firewall configuration overhead.

  1. Deploy OVA to your vSphere environment. Deploy an OVF or OVA Template

  2. Edit VM settings and adjust according to the network environment size (check requirements). Configuring Virtual Machine Hardware

    1. 2. Change CPU count.

    2. Change memory size.

    3. Add a new empty virtual disk if necessary > https://ipfabric.atlassian.net/wiki/spaces/ND/pages/634060809/Increase+disk+space

  3. Power on VM.

Complete First Boot Wizard

The First Boot Wizard starts when IP Fabric is run for the first time and configures system options. The wizard can also be re-run later from the service interface to modify basic system parameters.

  1. Assign hostname.

  2. Assign domain name.

  3. Choose IP address acquisition method.

  4. If a static method is used, configure IP address, netmask, default GW, and DNS servers.

  5. Configure NTP servers or just click OK to continue if not using NTP.

  6. Select time zone.

  7. Configure Internet Proxy if used.

  8. Set shell user password of osadmin user. The password is used to access the IP Fabric administrative interface and system shell (not for the GUI access, the GUI is accessible with the 'admin' username by default, for more information, please, read: https://ipfabric.atlassian.net/wiki/spaces/ND/pages/79036476/Access+User+Interface+and+Install+License and also for encrypting system backups.

  9. Optionally define organization parameters for the local SSL certificate.

  10. After rebooting, the console login screen will display the assigned IP address of the system and provide a link to access the user interface.

Remember password from point 8. ! IP Fabric support engineers are able to reset osadmin user passwords but encrypted backups will be lost!

A trusted certificate can replace a self-signed SSL certificate using IP Fabric web UI.