IP Fabric v3.x.x

IP Fabric v3.x.x

3.8.2 (1st July 2021)

Features - Protocol and technology support

  • AWS - added data to the table Technology / Routing / VRF

Improvements

  • DNS name resolving, changed the way how we recognize if DNS server is available. Don't try to resolve public IP 8.8.8.8 but check if any nameserver is set
  • Snapshot management / Inventory table - allowed advanced filtering option\
  • Tables help - API endpoint includes full URL including server name
  • Updated EoL records for Aruba CX
  • System / Advanced settings - Option "Saved configuration check" was removed - it can be controlled now from "Discovery Tasks" in advanced settings
  • Vendor API setting is part of snapshot settings now
  • Cisco IOS, IOS-XE and NX-OS - Added support for access-classes and transport methods on VTY lines to “technology/management/aaa/lines” table (as hidden columns Inbound ACL, Outbound ACL, Transport Input, Transport Output, Allow VRF login)
  • Transceivers statistics table - round delta low value to two decimal places

Bug Fixes

  • Arista EOS - fixed parsing of different output for command "show ptp masters”
  • Arista EOS - fixed parsing of different output for command "show ptp local-clock"
  • Aruba CX - Added support for Aruba OS 10.07 routing table output
  • Checkpoint Gaia - fixed API endpoint /show-gateways-and-servers errors - VSX clusters & checkpoint host objects
  • CheckPoint Gaia - fixed parsing of bandwidth information for command “show virtual-system all“
  • Cisco IOS - exclude OSPFv3 "authentication/confidentiality" IPSec tunnels.
  • Cisco IOS - fixed parsing for command "show subscriber session all"
  • Cisco IOS - fixed parsing of command "show ip flow export" in case flow export is disabled
  • Cisco IOS - fixed parsing of different output for command "show interface switchport"
  • Cisco IOS-XE - fixed parsing of platforms containing dashes in model name
  • Cisco IOS-XE - fixed transceiver detection
  • Cisco IOS-XE, NX-OS - fixed parsing of command "show ptp brief" in case of ports in 'INITIALIZING' status
  • Cisco IOS-XR - fixed parsing of different output for command "show isis interface"
  • Cisco IOS, IOS-XE, IOS-XR - fix parsing of command "show ip route" for routes installed years ago. Add parsing for routes pointing to Null0
  • Cisco IOS/IOS-XE - VRRP parsing fixed not to fail on IPv6 groups
  • Cisco SX - fixed platform and model detection
  • Dell PowerConnect - Fixed parsing of show "show mac address-table" command containing multicast addresses
  • Extreme Xos - changed STP Root and Bridge IDs parsing to contain only MAC address part
  • Extreme Xos - Fixed parsing of STP ports with asterisk from command "show stpd <stpDomain> ports detail"
  • Extreme XOS - RIB edges removed for local interfaces
  • Fix of bug "Invalid snapshot format" so snapshot wasn't able to load
  • Fix: Do not download the configuration file multiple times from the same IP address.
  • FRR - don’t show error if BGP/OSPF daemon is not running
  • FRR - fixed parsing of different output for command “show version“
  • HP ArubaSw - fix parsing of capabilities from "show lldp info remote' command"
  • HP ArubaSw - fix parsing of command "show interface brief" in case interface does not have media type
  • HP ArubaSw - improved device model detection
  • HP Comware - Added support for interface status 'STP DOWN'
  • HP Comware - fix parsing of command "show ap bss-table" to allow more values in 'phy' column
  • HP Comware - fixed parsing of 'display interface' command for the different output format
  • Huawei NE 8000 platforms - version detection fixed
  • Juniper Junos - fixed parsing of command 'show spanning-tree statistics interface' to support another output format
  • Juniper Junos - fixed parsing of different output for command "show route active-path"
  • Juniper Junos - fixed vrf leak to the main routing table (inet.0).
  • Juniper Junos - Improve error message when the firewall isn’t able to provide output for cmd "show security ike security-associations detail".
  • Juniper Junos - Improve error message when the firewall isn’t able to provide output for cmd "show security ipsec security-associations detail".
  • Juniper Junos - MPLS forwarding tables collection fix
  • Mikrotik - fixed ipsec parsing for non-tunnel policies
  • Mikrotik - fixed parsing of interfaces which have an only numeric name
  • Palo Alto - Cluster state detection added. Fixes path lookup on duplicate IP on both nodes in the cluster.
  • Paloalto - fixed tunnel proposals were not parsed correctly with long tunnel names
  • STP edges to Juniper SRX firewalls with virtual mac address fix
  • UI - fixed overflow of items from select boxes used in modals dialogs
  • Versa VOS - fixed mapping of API call "/vnms/dashboard/appliance/site-a/live?command=arp/all".
  • Versa VOS - fixed mapping of API call "api/config/devices/device/<appliance>/config/networks/network".
  • Versa VOS - fixed mapping of API call “/vnms/dashboard/appliance/<appliance>/live?command=interfaces?deep"
  • Versa VOS - fixed mapping of interfaces without MAC address.

3.8.1 (7th May 2021)

Improvements

  • F5 BigIP - collect configuration from all partitions, not just from Common as was before.
  • Cisco IOS, IOS-XE, IOS-XR - add metric and passive properties to IS-IS Interfaces table

Bug Fixes

  • SSH connections could have timeouts on login
  • Arista EOS - fixed parsing of 'show system environment all' command in case there are N/A values
  • Cisco ASA - Fixed parsing of snmp location
  • Cisco IOS - fixed parsing for command "show flow exporter"
  • Cisco NX-OS - fixed parsing for command "show flow exporter"
  • Juniper Junos - routing table - fixed parsing of MPLS labels
  • F5 BigIP - new cmd “show sys cluster all-properties“ to add cluster management interfaces to interface list.
  • Paloalto IPSec - fixed parsing of tunnels with long names and multiple proposals

3.8.0 (26th April 2021)

OVA MD5SUM: 2f693acf59d9f31d28507c7edc58234f
OVA SHA256SUM: 2b208eb7584fd5b4708ea56a7f1688f4bf44624c872ef0d6b792576e88f9ff00

New Vendor Support

  • Added support for Aruba CX
  • Added support for Checkpoint Gaia Embedded platform
  • Added support for AWS - Discovery, inventory and routing support for VPC, transit gateway, VPN gateway, nat gateway
  • Added support for Versa VOS - basic discovery process

Features - Protocol and technology support

  • Cisco ACI - Added NTP support
  • Cisco ACI - DTEP collection added
    • Tables located at Technology / SDN / ACI / DTEP
  • Added Multi-Chassis LAG support for Arista EOS and Extreme XOS
    • Tables located at Technology / PortChannel / MLAG
  • Arista EOS - added support for VARP (Virtual-ARP)
    • Table located ar Technology / FHRP / Virtual Gateways
  • Arista EOS - added PoE support
  • Arista EOS - added support for environment information
  • Cisco NX-OS, IOS-XE, Arista EOS - The Precision Time Protocol support added
    • Tables located at Technology / Management / PTP
  • Cisco IOS, IOS-XE: Add support for PPPoE
    • Tables located at Technology / Interfaces / PPPoE

Improvements

  • Table Technology / Platforms / Cisco VSS / Chassis - add column Chassis SN
  • More precise parsing of platform identifier for Cisco Catalyst series
  • VLAN topology calculation improved for mismatched designatedPortId and opposite side portId using xDP
  • Juniper, Palo Alto - add vrf leak support to the routing table.
  • Cisco WLC-AIR - improved pagination handling - backspace is sent to display an additional page of command output
  • Table Inventory / Interfaces - added columns about Transceivers (if exist, SN, PN, Type - 3 of them hidden by default)
  • Table Technology / Security / IPSec / Tunnels - added column "Interface description"
  • Table Technology / Security / IPSec / Gateways - added column "Interface description"
  • Table Technology / Platforms / Stacks / Stack Ports - For stack technologies that use regular ports for the stack, a new column with a list of stack interfaces added.
  • Table Technology / Interfaces / Transceivers / Statistics - added column with delta between Value and Low
  • System / Settings / Advanced / Vendor API settings - each setting can be enabled / disabled
  • When the application will lose connection with the server then is shown "Connection lost" overlay
  • Juniper Junos - filter out VRRP backup virtual IP from the managed IP list
  • Managed duplicate IP table - removed for:
    • Aruba AP - /32 IP on tunnel interfaces taken from another interface
    • Versa - Internal IP
    • IPv4 link local addresses 169.254.0.0/16
    • Loopback addresses 127.0.0.0/8
  • The End Of Live database has been updated for Vendors (Cisco, HP, F5, PaloAlto, Arista, Extreme)

Bug Fixes

  • Fix UI - table filters lost when URL is used after authentication
  • Arista EOS - added parsing of interface load and fixed interface counters parsing
  • Arista EOS - fix the mapping of multi-lane transceiver physical interface names
  • Arista EOS - fixed empty ip address of admin shutdown interfaces
  • Arista EOS - fixed parsing of bandwidth information for command "show ip igmp snooping group"
  • Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
  • Arista EOS - fixed parsing of different output for command "show ip igmp snooping groups"
  • Arista EOS - fixed parsing of empty output for command "show ptp local-clock"
  • Arista EOS - remove non-existing Router interfaces from Interface inventory
  • Arista EOS - sometimes show the wrong VRF for admin shutdown interface, fixed.
  • Arista EOS - Spanning tree with MLAG - PeerEthernet ports removed.
  • Avaya/Extreme VOSS - Uptime with years fix
  • CheckPoint Gaia - error about missing router ID was shown even if BGP was disabled
  • Checkpoint Gaia - fixed parsing of different output for command "show cluster members interfaces all"
  • Cisco - fix parsing switchport mode dot1q-tunnel
  • Cisco - Fixed parsing show running-config command - line password with spaces.
  • Cisco - remove non-existing Sup-Eth interfaces from Interface inventory
  • Cisco ACI - fixed parsing of different output for command "show coop internal info ip-db"
  • Cisco ACI, NX-OS - fixed parsing of interface description.
  • Cisco ASA - fix parsing of not configured tunnels
  • Cisco ASA - fixed parsing of different output for command "show crypto ipsec sa"
  • Cisco ASA - fixed parsing of different output for command "show crypto isakmp sa detail"
  • Cisco IOS - Allow PIM RP without groups
  • Cisco IOS - fix duplex and media type for C1700
  • Cisco IOS - fix parsing of command "show ip igmp snooping mrouter" in case there are no ports configured
  • Cisco IOS - fix parsing of large output from "show mac address-table multicast"
  • Cisco IOS - fixed parsing of different output for command "show lldp neighbors detail"
  • Cisco IOS - fixed parsing of output for command "show ip igmp interface"
  • Cisco IOS - HSRP - fixed preemption detection
  • Cisco IOS-XE - BGP - fixed address family detection
  • Cisco IOS-XE - fixed parsing interfaces without outDrops counter
  • Cisco IOS-XE - fixed parsing of different output for command "show ap name <apName> wlan dot11 5ghz/24ghz"
  • Cisco IOS-XE fixed STP interface - VLAN mapping (TwoGigabitEthernet and AppGigabitEthernet)
  • Cisco IOS-XE WLC - Fixed parsing for interfaces with "invalid" as a value for speed
  • Cisco IOS-XE WLC - fixed parsing of different output for command "show wlan summary"
  • Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
  • Cisco IOS, IOS-XE and IOS-XR - Routing table parsing fixed
  • Cisco IOS, IOS-XE, ASA - fixed interface mapping in IPSec task.
  • Cisco IOS, NX-OS - use the full form of commands to avoid ambiguous commands - "show spanning-tree summary", "show spanning-tree detail", "show port-channel summary", "show etherchannel-summary"
  • Cisco IOS/IOS-XE - Fixed LLDP neighbors parsing in case output is split to 2 lines
  • Cisco IOS/IOS-XE - VRF name parsing fixed to disregard ending semicolon (if it is present)
  • Cisco NX-OS - added FEX info to inventory
  • Cisco NX-OS - fixed false-positive error emit in case "show monitor session all" contains information that destination port is in use in other span.
  • Cisco NX-OS - fixed parsing for command "show fex detail" for cases fabric port for control traffic is not provided.
  • Cisco NX-OS - fixed parsing of different output for command "show vrrp detail"
  • Cisco NX-OS - XDP links for LLDP protocol might have not been created in some cases
  • Cisco NX-OS- fixed parsing of show running configuration with some specific banner configured.
  • Cisco SG - fixed interface parsing in ARP table
  • Cisco SG - fixed LLDP neighbors detection in multiline output
  • Cisco SG - fixed parsing of different output for command "show sflow configuration"
  • Cisco SG - fixed parsing of different output for command "show spanning-tree detail"
  • Cisco SG 500 - fixed STP interface - vlan mapping (slash format)
  • Cisco XE - fixed xSR platforms identification
  • Cisco XR - fix parsing for command 'show version' (caused empty hostname)
  • Dell Powerconnect - fixed version detection for switches N2048
  • Extreme VOSS - fixed LLDP neighbor parsing
  • Extreme XOS - added reason for administratively down ports
  • Extreme XOS - Fixed STP parsing for multirow vlans output
  • Extreme XOS - Fixed STP parsing for PVST+ mode
  • Extreme XOS - transceivers task execution enabled
  • Fortinet FortiGate - fixed missing description in Interface Inventory table
  • HP Aruba - fixed parsing of details for AP which come down during discovery
  • HP Arubasw - fixed detection of model
  • HP Arubasw - Fixed error handling for LLDP neighbor with wrong format of Chassis ID
  • HP Arubasw - fixed mac-address collecting on some models
  • HP Arubasw - fixed parsing of different output for command "show interface brief"
  • HP Arubasw - fixed parsing of different output for command "show interfaces transceiver detail"
  • HP Arubasw - fixed parsing of different output for command "show interfaces transceiver"
  • HP Comware - fix parsing ARP table for platform 5130
  • HP Comware - fixed parsing of different output for command "display clock"
  • Huawei VRP - fixed parsing of different output for command "display info-center"
  • Huawei VRP - Fixed ARP parsing in case (SIP/DIP) is shown
  • Huawei VRP - fixed interface clearing time parsing
  • Huawei VRP - Fixed parsing for empty mirroring groups
  • Huawei VRP - fixed parsing of different output for command "display mac-address"
  • Huawei VRP - fixed parsing of different output for command "display vxlan tunnel"
  • Huawei VRP - fixed parsing of empty output for command "display dhcp snooping"
  • Huawei VRP - VXLAN Tunnels - command parsing fix when empty output is received
  • Juniper Junos - Configuration parsing fix for “protect protocols mstp” command
  • Juniper Junos - fixed parsing of different output for command 'show configuration | display set | except "^deactivate"'
  • Juniper Junos - fixed parsing of different output for command "show chassis environment"
  • Juniper Junos - fixed parsing of different output for command "show chassis routing-engine"
  • Juniper Junos - IGMP groups fix mapping of 'never' value for expires for
  • Juniper Junos fix false-positive err-disabled statuses
  • Meraki - L2 interfaces, reason “connecting” added
  • Palo Alto - an interface that wasn’t associated with any VSYS could be missing in the interface inventory
  • Palo Alto - collect list of VRFs from show commands instead of configuration
  • Palo Alto - collect transceivers only for interfaces of the currently processed virtual system
  • Palo Alto - fixed missing routing tables on single vsys firewalls
  • Palo Alto - fixed parsing of command "show vpn gateway" with multiple DH groups
  • Palo Alto - fixed parsing of different output for command “show routing route”
  • Palo Alto - fixed parsing of different output for command “show vpn flow“
  • Palo Alto - fixed vendor bug where the sessions keep open even the connection is correctly closed. Using "exit" cmd for disconnection.
  • Vlan topology calculation - Virtual mac used in switch ID for Cisco Nexus fix

3.7.6 (8th March 2021)

OVA MD5SUM: a47d9983d046f74a34a17f5025cb7bd8
OVA SHA256SUM: c5972d44b012ff3b3411ea3c6666651e9c6c453a50009c0062df99c11ae29e0b

Improvements

  • Add support for Cisco Firepower 9000 series SM-24
  • Add indexes to speed up several DB queries
  • Table Technology / Routing / BGP / Neighbors - added "Local interface" column
  • Palo Alto - show also unconfigured ports in IPF
  • Cisco Meraki - Zx Teleworker Gateways - extended support for interface and routing table discovery (to gather this information Zx teleworker gateways processed pretty much the same as MX firewalls).

Bug Fixes

  • Pathlookup - IGMP snooping fail fix
  • Juniper - IRB L3 interface correct VLAN ID assignement
  • Fortinet FortiGate - zone firewall could be missing in some cases since the unit was considered as a HA slave
  • Palo Alto - first configured vsys could be missing in discovery result
  • Cisco FTD - fixed detection of service objects with names matching ICMP options keywords

3.7.5 (22nd January 2021)

OVA MD5SUM: b4c940832cbd592f2653553d72f11f33
OVA SHA256SUM: c16cbac6040e7d07d04c42142ddbb42acc0547c912d726efa1bd1138a58f5be4

Features - Protocol and technology support

  • Palo Alto - add port channel support

Improvements

  • API Requests rate limiter counts only unresolved requests
  • Cisco ACI routing edges establish improvements.
  • Cisco NX-OS - Added Route-Target information for VRFs in BGP process
  • Fortinet FortiGate - added support for emac-vlan interfaces
  • Huawei - All send commands expanded to the full syntax
  • Table Technology / Interfaces / Transceivers / Inventory - added L1/L2 state columns
  • Frontend - implement request rate limiter

Bug Fixes

  • CheckPoint Gaia - fixed processing of zone firewall services (DCE-RPC, port ranges)
  • Cisco ACI - an unsupported show run command is no longer downloaded
  • Cisco ASA/FTD - L3 interfaces ‘local’ IPs are no longer derived from static ARP entries
  • Cisco IOS - fixed parsing of bandwidth information for command "show policy-map interface"
  • Cisco IOS - fixed parsing of different output for command "show mac-address-table multicast"
  • Cisco IOS - fixed parsing of different output for command "show standby"
  • Cisco IOS - Fixed showRun parsing for sections aaa, SNMP
  • Cisco IOS-XE - command "show wireless client mac-address <mac> detail" - filter out clients without ap.
  • Cisco IOS-XE WLC - improved parsing and overall wireless AP processing capabilities to better handle erroneous command outputs
  • Cisco IOS, IOS-XE - fixed parsing of source interface for AAA servers.
  • Cisco NX-OS - fixed parsing of different output for command "show interface transceiver details"
  • Cisco NX-OS - fixed parsing of different output for command "show spanning-tree mst"
  • Cisco NX-OS, IOS-XE - fixed parsing of different output for command "show version"
  • Cisco NX-OS/ACI - L3 interfaces ‘local’ IPs are no longer derived from static ARP entries
  • Cisco SG - Fixed ambiguous commands
  • Cisco SG - Fixed parsing of interface name (SG 500)
  • Documentation - the report was broken when the text included Unicode characters
  • Establishing BGP neighborship improved based on VLAN
  • Establishing RIB neighborship between ACI and FW improved based on VLAN and neighbor protocol
  • Fortinet FortiGate - fixed missing MAC addresses on all interfaces if the modem was active
  • Fortinet FortiGate - L2 data for some of the interfaces could be missing, L2 state could be wrong in some specific cases
  • Fortinet FortiGate - show only IP addresses from the active (virtual) cluster member
  • HP Aruba switch fix parsing of hostname
  • HP Arubasw - fixed parsing of different output for command "show vlans"
  • HP Arubasw - fixed parsing of different output for command “show lldp info local-device"
  • HP Comware - fixed parsing of different output for command "display arp"
  • HP Comware 1910 - fixed version detection
  • HPE V1910 - Fixed platform detection
  • Juniper Junos - fixed parsing of different output for command "show igmp group"
  • Juniper Junos - IRB L3 interface correct VLAN ID assignment
  • Juniper Junos - STP - VLAN specific information parsing fixed for VSTP
  • Palo Alto - list only L2 interfaces that belong to the processed virtual system
  • Pathlookup - Device connected to ACI LEAF fix
  • Pathlookup - Transit search with tunnel fix (tunnel destination IP is now used)
  • System Administration - allows restarting of Discovery services
  • Technology / Addressing / Managed IP - table "DNS name match hostname" and "DNS (A/CNAME record)" columns did have correctly set failed status.
  • The Discovery process may be stuck when Tacacs is overloaded - fixed

3.7.4 (21st December 2020)

Improvements

  • Topology calculation -  virtual mac calculation optimized
  • Discovery  - Summary of Issues is refreshed every 5mins (from 1min) to prevent DB overload
  • Optimized DB queries for Discovery - Summary of issues

3.7.3 (17th December 2020)

Features - Protocol and technology support

  • Cisco ACI - add support for OSPF
  • CheckPoint Gaia - added support for VSX firewalls and switches

Improvements

  • Checkpoint Gaia - use the default Router ID for BGP if it isn’t explicitly configured
  • HP Aruba - (Technology / Wireless / Radios / Radios-detail) improve wlans mapping when AP is in monitoring mode
  • Palo Alto - add rebuild property to version.
  • Palo Alto - add support of fqdn objects in Zone FW.
  • Pathlookup - Application of ACL and zone firewall for MPLS links.
  • RIB topology - Down interfaces used as a source for unnumbered interfaces filtered from the calculation.

Bug Fixes

  • Arista EOS - fix parsing of IP route table when IP routing is disabled
  • Arista EOS - fixed parsing of different output for command "show ip route vrf <vrfName>"
  • CheckPoint Gaia - fixed mapping of different output for API endpoint "/web_api/show-gateways-and-servers"
  • Cisco ACI - fixed parsing of different output for command "show coop internal info ip-db"
  • Cisco IOS - fixed parsing of different output for command "show mpls forwarding-table detail"
  • Cisco IOS - fixed parsing of different output for command "show vrf detail"
  • Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
  • Cisco IOS-XR - VRF-based routing information parsing fixed
  • Cisco NX-OS - ACL with IPV4 syntax added
  • Cisco NX-OS - fixed parsing of different output for command "show mpls switching"
  • Cisco NX-OS, IOS-XR - fixed parsing of different output for commands "show hsrp", "show hsrp detail", "show vrrp detail"
  • Cisco SG - dot1x related commands parsing fixed
  • F5 BigIP - fix “show sys hardware” failure in version detection
  • Fixed Device type detection - One non-connected route is enough for router
  • Fortinet FortiGate - fixed missing VIP groups in zone firewall
  • Fortinet FortiGate - fixed parsing of different output for command "show firewall service group"
  • HP Arubasw - fixed parsing of different output for command "show trunks"
  • HP Comware - fixed parsing of different output for command "display device manuinfo"
  • Huawei - Fixed ambiguous commands for arp, dhcp snooping, sflow, port-mirroring
  • Huawei - MPLS to RIB transport label mapping - 3 implicit null label removed
  • Juniper Junos - fixed parsing of different output for command "show vlans detail"
  • Juniper Junos - show route active-path command parsing updated and fixed
  • Palo Alto - fixed parsing of different output for command "show config merged"
  • Pathlookup - MPLS - nexthop without IP secondary lookup in VRF added
  • Pathlookup - Multiple NH with different link type fix

3.7.2 (3rd December 2020)

Improvements

  • Cisco - IP disabled or unconfigured interfaces excluded from saving into L3 interfaces table (IPv4, IPv6)
  • API POST /discovery/trigger-config-backup - config backup is possible to execute via API no matter on trigger setting
  • Routing protocols and RIB neighborship establishment improvement for unnumbered IP with help of xDP
  • Speed of topology calculation has been improved for networks with a lot of XDP records

Bugfixes

  • Arista EOS - fixed parsing of different output for command "show ip ospf interface"
  • Arista EOS - fixed parsing when the device returns empty string for command "show ip ospf interface"
  • Arista EOS - fixed parsing when the device returns an empty string for command "show logging"
  • Cisco ACI - Edge switch calculation fix (precedence from endpoint table on a leaf over ARP on other devices)
  • Cisco ACI - Leaf to switch VLAN topology fix for same access VLAN for two different PI VLAN (caused discovery finish calculation fail on the unique index).
  • Cisco ACI - Switch to leaf L2 path VLAN translation from access VLAN to PI VLAN fix
  • Cisco IOS - fixed parsing of different output for command "show crypto ikev2 sa detailed"
  • Cisco IOS - fixed parsing of different output for command "show standby"
  • Cisco SG/NX-OS - power supply & fan information processing fixed
  • F5 BigIP - doesn’t run cmd "list /sys management-ip" on vCMP guests, it doesn’t return any value on this platform.
  • Fortinet FortiGate - fixed parsing of different output for command "show firewall address"
  • Fortinet FortiGate - fixed parsing of different output for command “get system status“
  • Fortinet FortiGate - fixed processing of policies with service ALL in zone firewall
  • Fortinet FortiGate - neighbor relationships fixed on VDOM links
  • HP Aruba - fixed parsing of different output for command "show ap port status ap-name <apName>"
  • Huawei VRP - fixed parsing of different output for command "display sflow"
  • Huawei VRP - fixed parsing of different output for command "display transceiver verbose"
  • Huawei VRP - fixed parsing of different output for command "display vxlan tunnel"
  • Huawei VRP - Mac address table, add bridge domain number to interface if missing
  • Juniper Junos - fixed parsing of different output for command "show configuration | display set | except "^deactivate""
  • Juniper Junos - fixed parsing of different output for command "show configuration security policies | display set”
  • Juniper Junos - fixed parsing of different output for command "show ethernet-switching interface"
  • Juniper Junos - fixed parsing of different output for command "show lldp neighbors interface <int>"
  • Juniper Junos - fixed parsing of different output for command "show security ipsec security-associations detail"
  • Juniper Junos - fixed parsing of different output for command "show security ipsec security-associations detail"
  • Juniper Junos - fixed parsing of different output for command "show vlans detail"
  • Mikrotik RouterOS - fixed parsing of different output for command "/ip neighbor print detail"
  • Palo Alto - transceivers - "show system state filter-pretty sys.s*.p*.phy command" parsing fixed
  • Palo Alto - Zone FW - fix parsing of shared firewall objects on multi vsys systems.
  • UI - Settings / Discovery Tasks - button Test in Firefox submit a form (save action) instead of Test action
  • Pathlookup - Route to switched interface fix to apply only on SVI interfaces.
  • Switch to router VLAN topology calculation - fix for number of MAC addresses limitation
  • Bridge domain VLAN topology calculation - fix for recalculation

3.7.1 (24th November 2020)

Features - Protocol and technology support

  • Palo Alto - add support for Syslog

Improvements

  • The login into the platform was slow - rewritten DB query for GET /snapshot endpoint
  • Rewritten DB query to speedup post-discovery topology calculation
  • Technology / Security / Zone firewal / Interfaces - format data in Zone column (separate multiple zones by space)
  • Cisco IOS-XE - command "show interfaces transceiver detail" - added handling for Cisco bug CSCuw38988 (version 03.07.05E & platform cat3k_caa)
  • Fortinet FortiGate - check whether a VDOM still exists before switching to it
  • HOTFIX - MERAKI API processing is disabled when the snapshot is started from graphs

Bug Fixes

  • Arista - transceivers - parsing fixed and extended
  • Aruba, Palo Alto - Fixed NTP server parsing when specified by FQDN
  • Checkpoint API data wasn't download on add new devices to the snapshot - fixed
  • CheckPoint Gaia - fixed parsing of different output for command "show ospf neighbors detailed"
  • CheckPoint Gaia - run command "show security-gateway memory statistics" (if available) instead of "fw ctl psat" which is deprecated
  • Cisco - IP unnumbered addresses mapped to L3 interfaces
  • Cisco ACI - Too long VRF name over multiple lines parsing fix for "show system internal epm vrf all"
  • Cisco ASA - fixed parsing of different output for command "show crypto ipsec sa"
  • Cisco ASA - fixed parsing of different output for command "show crypto isakmp sa detail"
  • Cisco IOS - fixed parsing of different output for command "show crypto ipsec sa"
  • Cisco IOS - fixed parsing of different output for command "show ip route"
  • Cisco IOS - fixed parsing of different output for command “show vlan brief“
  • Cisco IOS - multicast MAC address table - parsing updated to support IOS based routers
  • Cisco IOS XR - fixed platform and model detection for NCS series
  • Cisco IOS-XR - Bundle-Ethernet interface name standardization (Bundle-Ether, BE in different outputs, now all is BE).
  • Cisco IOS-XR - Device had incorrectly assigned IP addresses from EVPN ARP records
  • Cisco IOS-XR - routing table next hop with vrf leak parsing fix
  • Cisco IOS/XE - fixed parsing of different output for command "show lldp neighbors"
  • Cisco WLC-AIR - allow device discovery even if not possible to determine device platform and model
  • Fortinet FortiGate - fixed parsing of different output for command "diagnose firewall fqdn list"
  • Fortinet FortiGate - fixed parsing of different output for command "diagnose netlink aggregate name <name>"
  • Fortinet FortiGate - fixed parsing of different output for command "diagnose vpn tunnel list"
  • Fortinet FortiGate - fixed parsing of different output for command "show firewall vip"
  • HP Arubasw - fixed parsing of different output for command "show cdp neighbors detail"
  • HP Arubasw - fixed parsing of different output for command "show logging server"
  • Huawei ambiguous commands fix - display mac-address, display interface, display device manufacture
  • Huawei VRP - ARP - Vlan parsing fix when the record is over multiple lines.
  • Huawei VRP - fixed parsing of different output for command "display mpls ldp adjacency verbose"
  • Huawei VRP - fixed parsing of different output for command "display mpls lsp verbose"
  • Huawei VRP - fixed parsing of different output for command "display vxlan tunnel"
  • Huawei VRP - fixed parsing of different output for command "display vxlan vni"
  • Huawei VRP - Task VXLAN - Device without VXLAN configuration error fix
  • Juniper Junos - fixed parsing of different output for command "show chassis environment"
  • Juniper Junos - fixed parsing of different output for command "show chassis routing-engine"
  • Palo Alto - fixed parsing of different output for commands "show vpn *"
  • Palo Alto - fixed parsing of different outputs for command "show config pushed-shared-policy vsys <vsys>"
  • Transceivers statistics table - fixed data for threshold columns
  • Transceivers thresholds and errors tables - show only transceivers with some data

3.7.0 (9th November 2020)

OVA MD5SUM: 0b44008d783224387c9c894a61a33701
OVA SHA256SUM: 8a3805704b6f4b126d960e3953749f936c67e635d94d387d86ddea6ecf4ea8fc

Features - Protocol and technology support

  • Adds IPSec support for the following platforms
    • Cisco IOS, IOS-XE, ASA
    • Juniper Junos
    • PaloAlto
    • Mikrotik
  • Adds detailed IPSec technology tables
    • Tunnels (/technology/security/ipsec/tunnels)
    • Gateways (/technology/security/ipsec/gateways)
  • Adds Zone-Based Firewall support for the following platforms
    • Palo Alto
    • Checkpoint Gaia
  • Adds Transceiver support for the following platforms
    • WARNING: Transceiver information collection is intentionally disabled by default due to frequent bugs associated with reading transceiver status. Please make sure with vendor support about presence of such bugs in your code, or contact our support for best practices.
    • Cisco ACI, ASA, FTD, IOS, IOS-XE, IOS-XR, NX-OS, WLC
    • Arista EOS
    • Extreme XOS
    • Fortinet Fortigate
    • HP Arubasw, Comware
    • Huawei VRP
    • Juniper Junos
    • Paloalto
  • Juniper Junos - Adds support for IGMP snooping
  • Huawei - Adds support for MPLS LDP
  • Huawei - Adds support for MPLS
  • Huawei - Adds support for BGP EVPN
  • Huawei - Adds support for L2 VXLAN
  • Huawei CloudEngine - VBST for version 8 improvement, all STP data are now collected
  • Cisco NX-OS - Adds support for VRRPv3
  • Cisco IOS-XE - Adds collection of stack information for switches with platform cat9k_lite
  • Settings / API Tokens - API Access Tokens allows you to use IPF API easily and secure
  • Settings / Webhooks - Webhooks enable you to send notifications to web applications in response to events in IP Fabric platform.
  • Settings / Advanced / Discovery Tasks - possibility to exclude specific tasks from the discovery process
  • Settings / Advanced / SSH / Telnet - possibility to set custom port for protocol and subnet

Image

  • Added tcpdump package
  • Installation system wizard - Self-signed certificate with one letter country prevented to start all web services. Fixed with the requirement for two-letter country

Improvements

  • Pathlookup - Hairpin routing support added
  • Pathlookup - Do not create host L2 edge to edge switch if the host is connected to FEX
  • Pathlookup - ACI endpoint lookup - fix of the search when COOP on the spine was introduced in 3.6.0
  • Pathlookup - ACI default GW with non-ACI edge switch, VLAN mapping based on access encapsulation VLAN ID
  • Pathlookup - ACI routing on second POD LEAF with endpoint connected fix (VNI from the first POD removed)
  • Pathlookup - ACI LEAF to switch connection fix
  • Pathlookup - L2 vxlan multiple tunnel endpoints fix
  • Pathlookup - ACI host to more LEAFs connected fix
  • Pathlookup - Routing proxy spine with multiple VTEP fix
  • Pathlookup - two labels stack processing on PE (PHP disabled)
  • Pathlookup - VXLAN L2 host connected to VTEP over switched network
  • Pathlookup - implicit null label 3 for Huawei support
  • Access-lists - new port translation from name to number added (DHCP, DNS)
  • Arista VEOS - add model detection for CVX
  • Cisco ACI - virtual vlan L2 interfaces with connection to L2 stp domain added
  • Cisco 6500 & 7600 - IGMP snooping support improvement
  • Cisco Firepower - NTP is now executed on all versions but by default disabled in Discovery tasks settings
  • Selected snapshot is remembered, will be automatically selected in browser new tabs.
  • F5 BigIP - new cmd "|list /sys management-ip" to add management interface to interface list
  • HP Comware - collect media for L2 interfaces
  • Huawei - L2 STP link added between bridge domain and neighbor switch
  • Palo Alto - management port support added (for VSYS system is placed into lowest-numbered VSYS)
  • Table Technology / Platforms / Environment / Power supplies - add column Device Model
  • Table Inventory / Devices - Column "Serial number" is renamed to "Unique serial number" (includes virtualization unique identifier - context/vsys/VDC etc). "Serial number" column now contains real SN reported by the device.
  • Table Technology / Multicast / MRoute table - add "Vendor", "Family" columns (as hidden by default)
  • Table Technology / Multicast / MRoute / OIL Detail - add "Vendor", "Family" columns (as hidden by default)
  • Table Management / Discovery History - the records are updated only for new snapshot, not for snapshot load.
  • Table Technology / Platform / Stacks / Members - uptime fixed to show members uptime instead of master
  • Table Technology / Platform / Stacks / Stacks - new columns Lowest and diff uptime
  • Table Technology / FHRP / Group state - column version added for HSRP and VRRP
  • Table Help - the request payload formatted to valid JSON. Added button for payload & URL copy.
  • OSPF Area always formatted as an IP address
  • API - added route for device config backup triggering
    • POST /v1/discovery/trigger-config-backup (payload is JSON with IP or SN property)

Bug Fixes

  • Arista - fixed parsing of different output for command "show lldp neighbors detail"
  • Arista - fixed parsing of different output for command "show vrf"
  • CheckPoint Gaia - add cluster virtual IP addresses to the interfaces
  • CheckPoint Gaia - fixed parsing of different output for command "show ospf neighbors detailed"
  • Cisco 9800 WLC - Fix parsing when wireless client with "excluded" status is contained in output
  • Cisco 9800 WLC - fixed parsing of different output for command "show wireless interface summary"
  • Cisco ACI - fixed parsing of different outputs for command "show coop internal info ip-db"
  • Cisco ACI - Some show interfaces have 0000.0000.0000 mac, bia is taken instead
  • Cisco ASA - fixed parsing of different output for command "show run"
  • Cisco ASA Firepower - Platform detection improvement for 4000 and 9000 platforms.
  • Cisco Cat9K platforms - fixed parsing of show version output without stackwise
  • Cisco Catalyst 3K & 9K - Total output drops bytes/packets handling (CSCve59640).
  • Cisco IOS - add correct parameters to the command “show storm-control“ on Cat4500 platforms
  • Cisco IOS - fixed parsing of different output for command "show lldp neighbors"
  • Cisco IOS - fixed parsing of different output for command "show run"
  • Cisco IOS - fixed parsing of different output for command "show udld"
  • Cisco IOS - VSS - Current state time not provided for CAT4500 fix (removed as required property)
  • Cisco IOS - VSS - Four supervisor chassis fix
  • Cisco IOS - VSS - VSL link output from both switches fix
  • Cisco IOS 6800 - fixed parsing of different outputs for command "show mac address-table multicast"
  • Cisco IOS XR - fixed parsing of different outputs for command "show ntp associations"
  • Cisco IOS-XE - fixed parsing of different output for command "show run"
  • Cisco NX-OS - CDP capabilities includes phone, so it was wrongly classified as phone.
  • Cisco NX-OS - device model is taken from "show inventory"
  • Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp snooping groups"
  • Cisco NX-OS - OSPF interface fix for unnumbered interface
  • Cisco NX-OS - PIM with unnumbered interfaces fix
  • Cisco NX-OS fixed parsing of different output for command "show cdp internal global-info"
  • Cisco NX-OS fixed parsing of different output for command "show ip bgp vrf all all nei"
  • Cisco NX1000v - don't execute unsupported cmd "show cdp internal global-info"
  • Cisco SG - fixed hostname detection
  • Cisco SG - fixed parsing of different outputs for command "show interface status"
  • Extreme Boss - fixed parsing of different output for command "show arp-table"
  • Extreme Boss - fixed parsing of different output for command "show lldp neighbor-mgmt-addr"
  • Extreme Boss - fixed parsing of different output for command "show lldp neighbor"
  • Extreme Boss - fixed parsing of different output for command "show mac-address-table"
  • Extreme Boss - fixed parsing of different output for command "show port-statistics”
  • Extreme Boss - fixed parsing of different output for command "show running-config"
  • Extreme Boss - fixed parsing of different output for command "show vlan interface info"
  • Extreme Boss - fixed parsing of different outputs for command "show ip"
  • Extreme Boss - fixed parsing of different outputs for command "show mlt"
  • Extreme BOSS - fixed parsing of different outputs for command "show spanning-tree stp <args> port vlans"
  • Extreme BOSS - mac address table parsing fixed (caused discovery stuck). Fix in library common for more vendors, so this was possibly affecting more vendors
  • Extreme Boss - MSTP port role fix for stack
  • Extreme Boss - VLAN interface fix for stack and ports without vlans
  • Extreme Voss - fixed parsing of different output for command "show ip vrf"
  • Fortinet FortiGate - fixed collecting device info
  • Fortinet Fortigate - Mac address mapping to aggregate and VLAN interfaces (fixes path lookup L2 edge between switch and Fortigate)
  • Fortinet Fortigate - Prompt detection for VDOM with more than 11 characters fix
  • Fortinet Fortigate - Zone firewall fixes for load balancing VIP
  • HP Aruba - fixed parsing of different output for command "show ap port status ap-name <apName>"
  • HP Aruba - fixed parsing of different output for command “show lldp neighbor interface <intName> detail“
  • HP Arubasw - fixed model detection on stack switches
  • HP Arubasw - fixed parsing of different output for command "show ap details ap-name <apName>"
  • Huawei VRP - ARP table entries with L2 interfaces mapped to L3 interface to fix path lookup issues
  • Huawei VRP - BGP - Address family in VRF recognition fix
  • Huawei VRP - fixed parsing of different output for command "display lldp neighbor"
  • Huawei VRP - fixed parsing of different output for command "display mac-address"
  • Huawei VRP - fixed parsing of different output for command "display memory"
  • Huawei VRP - Route summary for VPN instances (VRF) fix
  • Juniper Junos - DHCP bindings for private VLANs without VLAN ID
  • Juniper Junos - don’t run discovery on secondary nodes.
  • Juniper Junos - EX3400 sn parsing fix
  • Juniper Junos - fixed parsing of different output for command "show ethernet-switching interfaces"
  • Juniper Junos - fixed parsing of different output for command "show lldp neighbors interface <intName>"
  • Juniper Junos - fixed parsing of different output for command "show vrrp detail"
  • Juniper Junos - IRB interface support in pathlookup
  • Mikrotik RouterOS - fixed showing duplicated L3 interface in case that both IPv4 and IPv6 address is configured
  • Palo Alto - fixed parsing of different outputs for command "show arp management"
  • Palo Alto - fixed parsing of different outputs for command "show interface management"
  • Palo Alto - Routing table collection in virtual systems fixed
  • Power supplies table - Missing SN can be taken from inventory if available
  • UI - Cron component - Sunday as an initial value wasn't selected

3.6.3 (10th September 2020)

Improvements

  • Cisco NX-OS and ACI - show inventory based chassis SN is the preferred device SN (otherwise show version based SN is used)

3.6.2 (9th September 2020)

Bug Fixes

  • Configuration Management - fixed getting config file using a parallel API requests
  • Configuration Management - fixed unexpected API failure when was used advanced filters in API request
  • HP Arubasw - fixed version detection on several platforms.

3.6.1 (17th August 2020)

OVA MD5SUM: B4F8C3DCA72657F8A38205D9B1C66626
OVA SHA256SUM: 0FBC098CEE58B7A1F14C6D7DAB822E47788ED2ADB0074DBCC9F745CE7BBEF557

Improvements

  • Site Separation - Regex rule - Site Name field as select box where user can select already created sites or type a new site name
  • Device Explorer - added Model into device detail tab. Also added model column into all tables where exists "platform" column
  • Table Technology / Management / SNMP / Summary - added columns Vendor, Model
  • Table Technology / Networks / Managed Networks - added VLAN ID column
  • Table Technology / Platforms / Cisco VDC - added Device Explorer detail for column Device
  • Cisco IOS - don’t run unsupported storm-control commands on Cisco C45xx platform
  • Maintenance scheduling - added option WEEK and MONTH to allow scheduling to allow job execution on a weekly / monthly basis.
  • Connectivity Report - added MAC address column
  • F5 BigIP - added parsing for model and platform device properties.
  • Added DB index for speed up of table Technology / IP Telephony / Phones

Bug Fixes

  • LDAP - fixed user email when LDAP returns multiple email addresses for a given username
  • LDAP - fixed user authentication, domain suffix to be case sensitive
  • UI - Search for page - removed duplicate results for the same page
  • Jumphost - fixed different SSH prompt when the connection is established
  • Router to switch L2 STP connection fixed for port channel interfaces
  • Cisco ASA - fix platform detection for FPR models.
  • Cisco IOS-XE - fixed parsing of different outputs for command "show ip igmp snooping mrouter"
  • Cisco IOS, IOS-XE - fixed parsing of different output for command "show udld"
  • Cisco IOS, IOS-XE - VSS information collecting fix
  • Cisco IOS, IOS-XE - ACLs - added support for packet length option
  • Cisco IOS - fixed Storm Control for C65xx platforms in case that storm control limits are not set
  • Cisco IOS - fixed parsing of different outputs for command "show switch virtual redundancy"
  • Cisco NX-OS - fixed version detection for models NX-OSv
  • Cisco NX-OS - MDS switches and Nexus 1k Virtual Services Appliance servers are flagged as “Unsupported devices”
  • Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp interface"
  • Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp snooping groups"
  • Cisco NX-OS - fixed parsing of different outputs for command "show cdp global"
  • Cisco NX-OS - fixed getting Fex Power Supply in fail/shutdown state.
  • Cisco IGMP snooping - parsing fixed for disabled IGMP processes on NX-OS and ACI
  • Fortinet FortiGate - don’t create xDP relation for VDOM links where both ends are in the same VDOM
  • Riverbed Steelhead - in some cases "show version" cmd did not provide model, in that case model is taken from "show info".

3.6.0 (1st August 2020)

OVA MD5SUM: 5E260AAA1E88BF4BD8523F0634FC3B4E
OVA SHA256SUM: 5933E36D0FE6CF8AAD22B8CDCF7EA00A90C0028D6D7CDDF85E005269419A4B34
Hyper-V MD5SUM: 634428E5722A53F87C4E0BD5C16F6285
Hyper-V SHA256SUM: 2556A6EB2C7B2DE7318E8FFF1787E5A63D5E5A54BFA1D72F3B416B60DBB8EF78

New Vendor Support

  • Extreme/Avaya - VSP switch family with VOSS basic discovery support added
  • Extreme/Avaya - ERS switch family with BOSS basic discovery support added
  • FRRouting - Added support for basic discovery

Features - Protocol and technology support

  • Device Explorer - Detailed view for each device
    • When you click on hostname value in every table then you can see data from any other table where the data will be automatically filtered for that device.
  • Added summarized tables about device inventory. New tabs in Inventory / Devices:
    • Vendors - Vendor overview in the whole network
    • Families - Vendor / Family overview in the whole network
    • Platforms - Vendor / Family / Platform overview in the whole network
    • Models - Vendor / Family / Platform / Model overview in the whole network
  • New table Technology => VLANs => L3 Gateways - shows VLANs without L3 gateway
  • New table Technology => Platforms => PoE => Modules - shows PoE information per module
  • Cisco ACI - Multicast support added
  • Cisco ACI - Add support for FEX & environment
  • Cisco IOS, IOS-XE - UDLD support added - interfaces and neighbors tables
    • Technology / OAM / UDLD
  • Cisco IOS, IOS-XE - VSS support added
    • Technology / Platforms / Cisco VSS
  • Cisco IOS, NX-OS, HP Comware - Storm Control support added
    • Technology / Interfaces / Storm Control

System

  • Jumphost - Intermediary Linux server with SSH can be used to forward IPF network discovery traffic. User credentials and SSH key for authentication are supported with multiple jumphosts.

Improvements

  • Site separation - the site separation was rewritten. The multiple rules can be defined, Regex rule can be without matching group.
  • Table Technology / Platforms / Stack / Connections - #Known members column added to filter false positive down states for provisioned switches.
  • Table Technology / Addressing / Managed IP - added column Vlan ID
  • Table Technology / Platforms / Stack / Members - added column Uptime
  • Table Technology / Addressing / Managed duplicate IP - Don't report duplicities for Cisco ACI and for "em%", "bme%", "avs%" interfaces
  • Table Inventory - Hosts: Added interface description into Edges column
  • Settings / OUI - added enable/disable for multi rows selection
  • ARP discovery - New OUI for HP/Aruba switches added
  • Neighbor protocols CDP/LLDP - deduplication of same neighbor improved
  • Intent Verification Rules - added icon for customized rules
  • Settings / Advanced / SNMP - added encryption passphrase into SNMPv3 settings
  • Arista EOS - collect average packet size for multicast routes
  • Cisco ACI - VTEP and VNI added to RIB for tunnel interfaces (to support forwarding to vtep from RIB)
  • Cisco ACI - COOP endpoint database collected on spines
  • Cisco Firepower FTD - L2 connection to switch fix, pathlookup will now show L2 path from/to FTD
  • Cisco NX-OS & ACI - local routes /32 are now parsed
  • Cisco NX-OS - fixed parsing of different output for command "show interface switchport"
  • Cisco Nexus FEX - support extended to better deal with possibly missing SN and model information in show fex detail command outputs
  • Cisco IOS-XE WLC - wireless AP MAC derivation changed to prefer MAC-based access point IDs over Ethernet port MACs to better match AP MACs provided by wireless clients
  • Cisco IOS & NX-OS - IGMP snooping groups modified to include mrouter ports
  • Cisco IOS & Arista - Mrouter port entries are inserted into snooping table when no receiver is present
  • Cisco IOS - BGP - add support for Cisco 7300
  • Cisco Firepower ACLs - added support for ‘trust’ action
  • L2 edge port classification improved - tunnel never can be edge port
  • Cisco Nexus - VPC pairs are now connected not only by domain but also must be CDP neighbors.
  • Neighbor discovery protocols improvements - Entries without IP processed, relationships established based on port id, chassis id etc.
  • Pathlookup - WLC detection improved for virtual IP on the management interface.
  • Multicast pathlookup
    • Source MAC taken from any node if not found on connected node in ARP
    • IGMP Snooping L2 path support added
    • Vlan added to device forwarding summary table
  • Table Technology / Inventory / OS versions
    • Performance improvement
    • F5 included
    • Palo Alto correct calculation fix

Bug Fixes

  • Pathlookup - Cisco FEX now correctly work in comparison between snapshots
  • Pathlookup - Own IP without local ARP entry on default GW fix
  • VLAN information is correctly saved even when STP is missing
  • Arista EOS - changed command for multicast routes counters for firmware version 4.23 and higher
  • Arista EOS - fixed version detection on virtual appliance (vEOS)
  • Arista EOS - remove duplicit route, route summary and arp records in vrf default. Fix missing vrf default in VRF task.
  • Arista EOS - fixed parsing of different outputs for command "show ip interface"
  • Cisco ACI - Endpoint table parsing fix for entries with missing flags
  • Cisco IOS & IOS-XE - show ip mroute vrf was on some platforms shortened and ambiguous.
  • Cisco IOS - fixed parsing of different outputs for command "show ip pim interface"
  • Cisco IOS/IOS-XE - fixed parsing of different outputs for command "show ip pim neighbors", entries without flags
  • Cisco IOS/IOS-XE - fixed parsing of different outputs for command "show ip mroute"
  • Cisco IOS/IOS-XE - fixed parsing of different outputs for command "show interfaces"
  • Cisco IOS C3750 - fixed parsing of provisioned member switches in command “show switch detail“
  • Cisco IOS-XE - "show version" stack member parsing fixed
  • Cisco IOS XR - fixed parsing of different outputs for command "show cef vrf <instance> detail"
  • Cisco Meraki - if the proxy is configured then the connection use that proxy
  • Cisco NX-OS 5000 - fixed parsing of different outputs for command "show nve interface"
  • Cisco NX-OS 5000 - fixed parsing of different outputs for command "show nve vni"
  • Cisco NX-OS - fixed parsing of different outputs for command "show ip pim rp vrf all"
  • Cisco NX-OS - fixed parsing of different outputs for command "show ip igmp snooping"
  • Cisco NX-OS - fixed parsing of different outputs for command "show mac multicast parsing", repeated header in the output
  • Cisco NX-OS - fixed parsing of different outputs for command "show vlan brief"
  • Cisco NX-OS - fixed parsing of different outputs for commands "show ospfv3 neighbor detail"
  • Cisco NX-OS - Fixed wrong command for IGMP snooping groups
  • Cisco SG - fixed parsing of different output for command "show arp"
  • Dell PowerConnect - fixed parsing of different output for command "show interfaces status"
  • Juniper Junos - fixed parsing of different outputs for commands "show multicast route extensive"
  • Juniper Junos - fixed parsing of different output for command "show connections extensive"
  • Juniper Junos - fixed parsing of different output for command "show virtual-chassis"
  • Juniper Junos - fixed parsing of different output for command 'show configuration | display set | except "^deactivate"'
  • Juniper Junos - fixed parsing of different output for command "show lldp neighbors interface <int>"
  • Extreme Enterasys - fixed parsing of different output for command "show spantree stats active sid <id>"
  • Extreme XOS - fixed parsing of different output for command "show edp ports all detail"
  • Extreme XOS - fixed parsing of different output for command "show configuration"
  • Fortinet FortiGate - fixed switching between VDOMs
  • HP Arubasw - fixed parsing of different output for command "show ip"
  • HP Arubasw - fixed parsing of different output for command "show vlans"
  • HP Arubasw - fixed parsing of different output for command "show vlans ports all detail"
  • HP Comware - fixed parsing of different output for command "display arp"
  • HP Comware - fixed parsing of different output for command "display mac-address"
  • HP Comware - fixed parsing of different output for command "display stp region-configuration"
  • HP Comware - fixed parsing of different output for command "display interface"
  • HP Comware - fixed parsing of different output for command "display fan"
  • HP Comware - fixed parsing of different output for command "display ip netstream export"
  • HP Comware - fixed parsing of different output for command "display power"
  • Huawei VRP - fixed parsing of different output for command "display interface"
  • Huawei VRP - fixed parsing of different output for command "display dhcp snooping statistics"
  • Huawei VRP - fixed parsing of different output for command "display eth-trunk"
  • Huawei VRP - fixed parsing of different output for command "display device"
  • Huawei VRP - fixed parsing of different output for command "display current-configuration"
  • PaloAlto - fixed hardware SN for virtual systems

3.5.4 (18th June 2020)

OVA MD5SUM: 7BB3D18A74F6D36D94330416C8A5E856
OVA SHA256SUM: 433B2001170341160275044DB430F1EF3F2ED2E1FA9C4E03A68F2A624B677510

Bug Fixes

  • Cisco Firepower - NTP disabled for version 6.5 and above due to Cisco bug CSCvt01938
  • HP Arubasw - prompt detection fixed - additional chars allow to appear in prompt

3.5.3 (9th June 2020)

OVA MD5SUM: 59D82DDADAD04C5F160D189A55B23B55
OVA SHA256SUM: 3FBA60725BC7261145759AE79DA8E38B54167141F755140D8F67699B5A7F1525

Improvements

  • Cisco IOS-XE - Add patch information into version
  • Cisco IOS-XE - show version parsing updated, stack task enabled for Cat9k and ct5760
  • End to End path - Gateway mac detection improved
  • Routing edges between devices improved - different VRF established if ARP and interface mac is available

Bug Fixes

  • End to End path - Multiple lookups on same node optimization fix
  • Arista EOS - fixed collecting of MAC table
  • Arista EOS - MAC multicast - missing multicast table fix
  • Arista EOS - IGMP snooping groups - flood support added
  • Cisco ASA/FTD - ACL evaluation fixed (for cases with inbound global ACL only)
  • Cisco ASA/FTD - "internal-only” interfaces are not parsed anymore (names like "Internal-Data”, "Internal-Control” or "Virtual” with nameif "_internal_loopback”)
  • Cisco IOS - fixed parsing of different output for command "show ip igmp snooping"
  • Cisco IOS - IGMP snooping - parsing fix for EOL comma, multiple versions, and different headers
  • Cisco IOS - MAC multicast - parsing fix for no ports or no VLAN entries, 6500 new header fix
  • Cisco IOS - fixed parsing of different outputs for commands "show ip pim rp vrf all" and "show ip pim rp mapping"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show wlan summary"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show wireless client mac-address <mac> detail"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap name <apName> wlan dot11 5ghz"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap name <apName> wlan dot11 24ghz"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap cdp neighbors"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different outputs for commands "show ap name <apName> ethernet statistics"
  • Cisco IOS-XE - show version - stack member parsing fixed to deal with missing system sn
  • Cisco NX-OS - fixed parsing of different outputs for commands "show ip pim rp vrf all" and "show ip pim rp mapping"
  • Cisco NX-OS - MAC multicast - different platform heading parsing fix
  • Cisco NX-OS - MAC address table - VTEP IP parsing fixed
  • Cisco Nexus VPC - STP virtual bridge ID mac fix, CDP to establish STP links for virtual bridge ID is required.
  • Fortinet FortiGate - fixed parsing of different output for command "show system zone"

3.5.2 (1st June 2020)

OVA MD5SUM: 2985C13C8185B470F4BD65A05826FCA2
OVA SHA256SUM: 84CF13C1266B0FC690765C2E547C61DF9679DF2B4CEC023CBEB3DEA06F46220F

Features - Protocol and technology support

  • Arista EOS - Added AAA support
  • Juniper Junos - add ISIS IPv6 neighbors support
  • Cisco FTD added support for AAA, ACL, NAT, NTP, Object groups, Routing table, SNMP, Syslog
  • Cisco IOS, IOS-XE, NX-OS & Arista - New IGMP Snooping and mac multicast tables
    • Technology / Multicast / Mac table
    • Technology / Multicast / IGMP Snooping / Vlans Configuration
    • Technology / Multicast / IGMP Snooping / Global Configuration
    • Technology / Multicast / IGMP Snooping / Groups
  • Cisco IOS, IOS-XE, IOS-XR, NX-OS & Arista & Juniper - Add info about PIM Rendezvous Points (RP) and Bootstrap servers
    • Technology / Multicast / RP / Overview
    • Technology / Multicast / RP / BSR
    • Technology / Multicast / RP / Mappings
    • Technology / Multicast / RP / Mappings Groups

Improvements

  • Settings - Advanced - new setting for discovery tasks
    • The discovery process can be limited only to devices that were already discovered in the past.
    • The number of tasks for discovery process can be also limited by "What information is used to identify neighbors"
  • Pathlookup - Multicast over unreachable transit support added.
  • Mikrotik RouterOS - remove syslog messages from command output + fixed processing of tunnel interfaces
  • Table Technology / Management / AAA / Servers - added columns "Destination hostname", "Config name" - (hidden by default)
  • Table Technology / IP Telephony / Phones - added columns "Vendor"
  • Cisco Nexus - Mroute table counters (incoming packets and avg. packet size) added
  • Cisco Nexus - routes with “pending only” parameters are not put into the routing table
  • Cisco FTD - uptime parsing fixed for device in failover cluster (device uptime is used now)
  • Added Voice VLAN parameter from Arista switchports.
  • Cisco ASA/FTD - added support for "show interface detail" command to better parse vlan IDs on interfaces (cmd "show interface" still kept as backup cmd)
  • Host-to-gateway - STP instance added not only based on ROOT ID (can be same for virtual mac) but also STP domain ID.
  • CSV export - export is limited to 2M rows to improve performance. We will introduce a separate Export job in the near future

Bug Fixes

  • Managed duplicate IP false positive removed for
    • VXLAN virtual address
    • VXLAN source loopback address
  • Fixed detection of some entry-level FortiGate models (e.g. 30D)
  • Unable to discover Meraki with automated snapshot
  • Enable discover HP ProCurve in the stack
  • The user with read priviliges could update intent verification rules.
  • Arista EOS - fixed collecting of multicast routing table for all VRFs
  • Arista EOS - fixed parsing of different output for command "show vlan"
  • Arista EOS - fixed parsing of different output for command "show ip ospf neighbor detail"
  • Arista EOS - fixed parsing of different output for command "show port-channel summary"
  • Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
  • Arista EOS - collect PIM commands for all configured VRFs
  • Cisco ASA - fixed parsing of different output for command "show context"
  • Cisco NX-OS - fixed parsing of different output for command "show ip igmp group vrf all"
  • Cisco NX-OS 9000 - MTU information is now taken from port configuration instead of QoS policy.
  • Cisco IOS - fixed parsing of different output for command "show ip vrf"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different output for command "show wireless client summary"
  • Cisco Firepower Threat Defense - fixed mapping of mac address table
  • Extreme XOS - get ARP records from all vr
  • HP Comware - fixed parsing of different output for command "display dhcp-snooping packet statistics"
  • HP Comware - fixed parsing of different output for command "display device manuinfo"
  • Huawei VRP - fixed parsing of different output for command "display bgp peer"
  • Huawei VRP - fixed parsing of different output for command "display bgp peer verbose"
  • Juniper Junos - fixed parsing of different output for command "show ldp neighbor extensive instance <vpnName>"
  • Juniper Junos - fixed parsing of different output for command "show spanning-tree bridge detail"
  • Juniper Junos - fixed parsing of various output for command “show interfaces terse"
  • Juniper Junos - fixed parsing of different output for command "show configuration | display set"
  • Juniper Junos - fixed parsing of different output for command "show ethernet-switching interface"
  • Juniper Junos - fixed showing of RPs in multicast routing table
  • Huawei VRP - fixed parsing of different output for command "display ospf peer"
  • Palo Alto - fixed parsing of different output for command "show arp all"
  • Cisco IOS-XE WLC 9800 - fixed parsing of different output for command "show ap summary"

3.5.1 (20th April 2020)

Features - Protocol and technology support

  • New multicast first-hop routers table - all routers which have connected sources ( Technology / Multicast / MRoute / First hop router)

Improvements

  • Improved system update procedure
    • Allow downloading logs from an update process
    • Progress bar for manual package upload
  • At the user's request, we increased CLI session timeout to a maximum of 600s (Warning: a high timeout can significantly prolong the discovery time)
  • Cisco ASA - ACLs and object groups - added support for ‘names’

Bug Fixes

  • Graph protocols - VXLAN VTEP sessions with virtual IP fix
  • Pathlookup - Default GW - prefer devices with host ARP entry
  • Pathlookup - Vxlan multiple router lookup in different VRF fix
  • Pathlookup - Encapsulation into VXLAN first edge RIB tunnel fix
  • Pathlookup - Multicast sources and receivers in snapshot comparison fix
  • Pathlookup - Multicast source connected to multiple routers with same mac is now represented by one source
  • Pathlookup - Multicast source and first-hop routers detection improved
  • Pathlookup - Multicast forwarding - do not send back from to incoming interface included in OIL
  • Multicast sources table - (*, G) false entries removed
  • Mikrotik RouterOS - in some cases getting xDP neighbors could fail (fixed)
  • Arista EOS - parse transceivers information from command "show inventory"
  • Arista EOS - parse transceivers information from command "show port-channel dense"
  • Arista EOS - fixed parsing of different output for command "show ip ospf interface"
  • Arista EOS - fixed parsing of different output for command "show ip route"
  • Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
  • Arista EOS - several multicast fixes regarding PIM neighbors & interfaces, IGMP
  • Cisco - showRun - parsing fixed and extended (ASA AAA, IOS NAT)
  • Cisco IOS-XR - fixed parsing of different output for command "show route summary detail"
  • Cisco IOS-XR version 5 - fixed OSPF task mapping, add new commands "show ospf interface", "show ospf vrf all interface"
  • Cisco IOS-XR - several multicast fixes regarding PIM neighbors & interfaces, IGMP
  • Cisco IOS-XE - WLC 9800 - fixed parsing of different output for command "show version"
  • Cisco Firepower Threat Defense - fixed mapping of L2 management interface
  • Cisco NX-OS - fixed parsing of different output for command "show ip bgp vrf all all neighbor"
  • Cisco NX-OS - fixed parsing of different output for command "show nve vni"
  • Cisco NX-OS - several multicast fixes regarding PIM neighbors & interfaces, IGMP
  • Cisco Nexus - correctly detect "Error: AAA authorization failed for command" as Authentication fail error
  • Cisco Meraki - added support for 'failed' interface state, counters load parsing extended
  • Cisco SG - fixed parsing of different output for command "show system"
  • Cisco IOS-XR - fixed parsing of different output for command "show system"
  • Cisco WLC - fixed parsing of different output for command "show ap wlan 802.11a <apName>"
  • Cisco WLC - fixed parsing of different output for command "show ap wlan 802.11b <apName>"
  • Juniper Junos - several multicast fixes regarding PIM neighbors & interfaces, IGMP
  • Juniper Junos - fixed remote IP’s mapping of CCC with long LSP names
  • Juniper Junos - fixed parsing of different output for command "show connections extensive"
  • Palo Alto - fixed missing routing table on some of devices
  • CDP/LLDP - Meraki neighbor parsing fixed

3.5.0 (1st April 2020)

OVA MD5SUM: A129A0FD9359105E9C637ADC332459AE
OVA SHA256SUM: 9A3713121B9072882F8332618594F4BAB566697D52544FEBB737DAD528321203
Hyper-V MD5SUM: 698E5DF7D7A945EE2FABCA4DA1EA845C
Hyper-V SHA256SUM: 29E185591D87B327B50D791F8916C6FC08C399984C5AE392902E9EF6418EA8F3

Features - Protocol and technology support

  • Add support for Cisco Meraki (REST API provides limited set of information)
    • Setup REST API connection at Settings / Advanced / Vendors API
  • Add support for L2VPN technologies: CCC, VPWS and VPLS. (Cisco IOS's, Juniper)
    • Tables in Technology / MPLS / L2 VPN
  • Add support BGP over IPv6 for Cisco XR
  • Add support for Multicast (IGMP, PIM, MROUTE) for Cisco IOS, IOS-XE, IOS-XR, NX-OS, Arista EOS, Juniper Junos
    • Tables in Technology / Multicast

Features - System

  • Techsupport file - added option to make database dump without devices data (only system tables + settings)

Improvements

  • Technology / FHRP tables improved to be VRF aware
  • CSV export - removed first line with "sep=;" and escape all value (stop forcing auto-format in excel
  • Pathlookup
    • MPLS explicit null label support added
    • MPLS swap and push label support added
  • Count of total rows for some table can be a big performance problem, so this feature is disabled for some tables. "unknown" is used instead of total rows.
    • Technology / MPLS / L3 VPN / PE Routes
  • Juniper Junos - Get import/export route targets to VRF from policies

Bug Fixes

  • Configuration management - syslogTrigger option didn't work, fixed
  • Tables - fixed updating of rule for Advanced Filters
  • Techsupport page - fixed issue when techsupport failed, then the UI still displayed that the process is in progress
  • Host to gateway - fixed Host in VRF
  • Arista EOS - keep domain name in hostname
  • Arista EOS - fixed mapping for VXLAN task
  • Arista EOS - fixed parsing of different output for command "show interfaces"
  • Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
  • Arista EOS - fixed parsing of different output for command "sho ip bgp neighbor vrf all"
  • Arista EOS - fixed parsing of different output for command "show ip bgp neighbor"
  • Cisco IOS-XE Catalyst 9000 - fixed parsing of stacking information
  • Cisco ASA - fixed parsing of different output for command "show ipv6 interface"
  • Cisco ASA - fixed parsing of different output for command "show run"
  • Cisco ASA - fixed parsing of different output for command "show route", add name alias to IP mapping
  • Cisco ASA - fixed parsing of different output for command "show run all object"
  • Cisco ASA - fixed parsing of different output for command "show ipv6 ospf neighbor detail"
  • Cisco IOS - fixed parsing of different output for command "show vrf detail"
  • Cisco IOS - fixed parsing of different output for command "show ip protocols"
  • Cisco IOS/IOS-XE - fixed parsing of capwap interfaces
  • Cisco ASR9K/10K - show version parsing fix
  • Cisco IOS-XE cat3K - stack member without HW version and empty stack parsing fixes
  • Cisco IOS-XE - fixed parsing of different output for command "show monitor detail"
  • Cisco IOS-XE - fixed parsing of different output for command "show authentication sessions"
  • Cisco IOS-XE - fixed parsing of different output for command "show run"
  • Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding-table detail"
  • Cisco IOS-XR - fixed parsing of different output for command "show ospfv3 vrf all-inclusive neighbor detail"
  • Cisco IOS-XR - fixed parsing of different output for command "show ospf vrf all-inclusive neighbor detail"
  • Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
  • Cisco IOS-XR - fixed parsing of different output for command "show hsrp"
  • Cisco IOS-XR - fixed parsing of different output for command "show isis neighbor detail"
  • Cisco IOS-XR - fixed parsing of different output for command "show snmp host"
  • Cisco IOS-XR - fixed parsing of different output for command "show run"
  • Cisco IOS-XR - fixed parsing of different output for command "show ospfv3 vrf all-inclusive interface"
  • Cisco NX-OS - fixed parsing of different output for command "show ospfv3 vrf all neighbors detail"
  • Cisco NX-OS - fixed parsing of different output for command "show ipv6 interface vrf all"
  • Cisco NX-OS - fixed parsing of different output for command "show fex detail"
  • Cisco NX-OS - fixed parsing of different output for command "show ospfv3 vrf all"
  • Cisco NX-OS - keep domain name in hostname
  • Cisco NX-OS - try to use 2 different commands for routing table per VRF instance
  • Cisco SG - fixed parsing of different output for command "show system"
  • Cisco SG - fixed parsing of different output for command "show run"
  • Cisco SG - fixed parsing of different output for command "show interface switchport <intName>"
  • Cisco SG - Secure access ports - port auth.state fix
  • Cisco WLC Air - fixed parsing of different output for command "show wlan <wlanId>"
  • Cisco WLC Air - fixed parsing of different output for command "show port detailed-info"
  • Cisco WLC Air - fixed parsing of different output for command "show ap wlan 802.11a <apName>"
  • Cisco WLC Air - fixed parsing of different output for command "show ap wlan 802.11b <apName>"
  • Cisco WLC Air - fixed parsing of different output for command "show lag summary"
  • Checkpoin Gaia - fixed parsing of different output for command "show ospf interfaces detailed"
  • Extreme XOS - fixed mapping for L2 interfaces
  • Extreme XOS - fixed parsing of different output for command "show stpd detail"
  • Fortinet Fortigate - fixed parsing of different output for command "diag netl agg name <aggregate>"
  • F5 BigIP - fixed parsing of different output for command "show cm device"
  • Fortinet FortiOS - fixed parsing BGP neighbors which are in active state for a long time
  • Fortinet FortiGate - Zone FW - FQDN address object couldn’t be found if it was defined with upper case letters
  • HP ArubaSW - fixed parsing of different output for command "show ap lldp neighbors"
  • HP Comware - fixed parsing of different output for command "display stp"
  • HP Comware - fixed parsing of different output for command "display wlan ap all verbose"
  • Huawei VRP - fixed parsing of different output for command "display ospf interface all"
  • Huawei VRP - fixed parsing of different output for command "display eth-trunk"
  • Huawei VRP - fixed parsing of different output for command "display lldp neighbor"
  • Huawei VRP - fixed parsing of different output for command "display snmp-agent community read"
  • Huawei VRP - fixed parsing of different output for command "display snmp-agent community write"
  • Huawei VRP - fixed parsing of different output for command "display ip routing-table vpn-instance <name> statistics"
  • Huawei VRP - fixed parsing of different output for command "display ntp sessions"
  • Huawei VRP - fixed parsing of different output for command "display observe-port"
  • Huawei VRP - fixed parsing of different output for command "display esn"
  • Huawei VRP - fixed parsing of different output for command "display vrrp"
  • Huawei VRP - fixed parsing of different output for command "display mac-address"
  • Huawei VRP - fixed parsing of different output for command "display port-mirroring"
  • Huawei VRP - imporved parsing for command "display ip vpn-instance" to support long names of VRF
  • Huawei VRP - "display device" and "display device manufacture-info" parsing fixed and extended to better support modular chassis
  • Checkpoint Gaia - improved OS version detection, support for new versions outputs.
  • Mikrotik RouterOS - fixed command to get bridge hosts table
  • Juniper Junos - fixed parsing of different output for command "show lacp interfaces"
  • Juniper Junos - fixed parsing of different output for command "show spanning-tree interface detail"
  • Juniper Junos - fixed parsing of different output for command "show configuration security policies | display set"
  • Juniper Junos - fixed getting VRRP group in idle state
  • Juniper Junos - fixed parsing of different output for command "show vrrp detail"
  • Juniper Junos - fixed parsing of different output for command "show interfaces statistics detail"
  • Juniper Junos - fixed parsing of different output for command "show ldp neighbor extensive instance <ipv4VpnName>"
  • Palo Alto - interfaces: n/a duplex and speed are not parsed as unknown but as n/a
  • Quagga - fixed parsing of different output for command "show bgp summary"
  • Quagga - fixed parsing of different output for

3.4.4 (11th March 2020)

OVA MD5SUM: EF151028D7F0DABFC556F87F3696E1C1
OVA SHA256SUM: 40449CAC066CF91A7934514DE870A86B5CDAD09D486C1863F8578259635E471A

Bug Fixes

  • Maintenance job - fixed memory leak in reading snapshots details.

3.4.3 (4th March 2020)

Improvements

  • Removed automatic sanitization for LDAP Settings
  • Added new option to disable LDAP nested groups for AD (speedup login process)
  • Added ldap-search tool into image for troubleshooting purposes

3.4.2 (27th February 2020)

OVA MD5SUM: 2B16E83667672944095CEC1BA6FCE92A
OVA SHA256SUM: 5652274E1678A40ADF03945F95FA174C0F06245CB213DB7CDBF9AD4FFDF65B40
Hyper-V MD5SUM: 43D8EDCDE98F7F176306B1529DDC32EE
Hyper-V SHA256SUM: AF8A6B44963C71E7FE28FB08D4D474FD2B18F93E17265C4F3CE5C6051984E017

Improvements

  • Added NGINX logs into techsupport file

Bug Fixes

  • LDAP Groups - the user groups are always determined using "member" and also using "memberOf" attribute, no matter on LDAP server type.
  • User management - fixed fail to create user with any capital letters
  • FIX API service isn't restarted when DB service isn't alive - only message in UI will be displayed
  • Cisco IOS - fixed parsing of different output for command "show crypto session brief"
  • Juniper - Add protocol isis parameter to cmd for route summary task (protection before downloading full bgp table)
  • Fixed several problems with Backup/Restore

3.4.1 (5th February 2020)

Improvements

  • Quagga Routing Suite - replaced command "show interfaces vrf all" with "show interfaces"
  • Quagga Routing Suite - replaced command "show ip route vrf all" with "show ip route"
  • Quagga Routing Suite - replaced command "show ip route summary vrf all" with "show ip route summary"

Bug Fixes

  • LDAP - fixed sanitization of DN information, improved LDAP logs
  • Arista EOS - fixed parsing of different output for command "show ip route <protocol>"
  • Arista EOS - fixed parsing of different output for command "show ip bgp neighbors"
  • Juniper Junos - fixed parsing of different output for command "show version" - missing hostname in output

3.4.0 (28th January 2020)

OVA MD5SUM: 0eba4cf8e164ce267ce6edd0677f8dda

OVA SHA256SUM: 17d733e041c2726bc0dd74d88573f88525c0a3ba9cfbb65ad4faafe0de4ce7b0

Features - Protocol and technology support

  • Added support for Cisco Converged Access WLCs and “Next-Gen” WLCs 9800
  • Added support for Quagga Routing Suite
  • Added basic support for Virtual Systems on Palo Alto firewalls
  • New VRF tables (Technology => Routing => VRF)
    • Summary - to get a quick overview of configured VRF in your network.
    • Detail - configured VRF per device.
    • interfaces - configured VRF on device and interface.
  • New L3 VPN tables (Technology => MPLS => L3 VPN)
    • PE Routers in network
    • VRF configured on PE routers with summary of routes in VRF
    • Route targets import and export configured in VRF
    • Routes on PE in VRF including originating source PE

Features - System

  • implemented LDAP groups - now is possible set permissions per LDAP domain group.
  • compare feature now working also for STP instances
  • FIX: L3 protocols edges disappeared after transit cloud expansion

Visualization

  • FIX: Positions of FEX's weren't correctly restored for next snapshot (or reloaded snapshot) - all views with FEX's have to be saved again after rearranging positions.
  • Pathlookup - Cisco ACI support added
  • Pathlookup - possibility to track packet path in specific VRF, including VRF auto detection.

Improvements

  • Added column Mac address into Technology => Management => Manage IP
  • Arista - ARP and RIB tables support for non-vrf devices
  • Arista - BGP and ISIS support for non-vrf devices
  • Cisco ASA cluster auto-generated MAC starting with A2 - when IP is learned from ARP, it’s included to discovery.
  • Fortinet Fortigate - added verstion detection for fortigate with Wifi module
  • Snapshot Management - Settings detail can be closed on ESC
  • Juniper Junos - VRRP groups were assigned to wrong subinterface. Now groups are assigned properly.
  • End of Life table improvement - One summary table per unique PID, one detail table showing all PID and their SN
  • Technology / Routing / Summary - BGP, IS-IS, OSPF, OSPFv3 added VRF column
  • CLI Authentication - allow to save duplicit usernames
  • L2 Edge port - xDP protocols on void are removed from decisions process as they can lie with their capabilities (e.g. OPX send it’s router)

Bug Fixes

  • Fixed problem with resolving DNS names - some IP didn't have to be translated.
  • Arista - fixed missing native VRF in OSPF
  • Arista EOS - fixed parsing of different output for command "show interfaces vxlan 1"
  • Arista EOS - fixed parsing of different output for command "show ip ospf neighbor detail"
  • Cisco ACI - Interface vlan mac address parsing fix
  • Cisco ACI - fixed parsing of different output for command "show vlan extended"
  • Cisco ASA routing table - nexthop IP to outgoing interface mapping fixed
  • Cisco IOS - fixed parsing of different output for command "show ip cef detail"
  • Cisco IOS - fixed parsing of different output for command "show mpls forwarding-table detail"
  • Cisco IOS - fixed parsing of different output for command "show spanning-tree mst"
  • Cisco IOS - fixed parsing of different output for command "show power inline"
  • Cisco IOS - fixed parsing of different output for command "show cdp neighbors detail"
  • Cisco IOS XE - fixed parsing of different output for command "show vlan brief"
  • Cisco IOS-XR - fixed parsing of different output for command "show mpls forwarding"
  • Cisco NX-OS - fixed parsing of different output for command "show nve vni"
  • Cisco NX-OS - fixed parsing of different output for command "show system internal l2fwder mac"
  • Cisco NX-OS - fixed parsing of different output for command "show logging server"
  • Cisco NX-OS - fixed parsing of different output for command "show interface switchport"
  • Cisco NX-OS - fixed parsing of different output for command "show environment fex all"
  • Cisco SG350 - fixed version detection
  • Cisco SG - fixed parsing of different output for command "show interface switchport"
  • Extreme Enterasys - fixed parsing of different output for command "show system"
  • Extreme Enterasys - fixed parsing of different output for command "show neighbors"
  • Extreme Enterasys - fixed parsing of different output for command "show lacp"
  • Extreme Enterasys - fixed parsing of different output for command "show port status"
  • Extreme Enterasys - fixed parsing of different output for command "show ip route"
  • Extreme Enterasys - fixed parsing of different output for command "show port counters"
  • Extreme Enterasys - improved version detection
  • F5 BigIP - fixed parsing of different output for command "show sys hardware"
  • Fortigate - fixed missing VIP address objects in FortiGate policies
  • Fortinet Fortigate - fixed parsing of different output for command "get router info ospf interface"
  • Fortinet Fortigate - fixed parsing of different output for command "get router info vrrp"
  • Fortinet Fortigate - fixed parsing of different output for command "show firewall policy"
  • HP ArubaSW - fixed parsing of different output for command "show trunks"
  • HP ArubaSW - fixed parsing of different output for command "show ip"
  • HP ArubaSW - fixed parsing of different output for command "show spanning-tree instance <instance>"
  • HP ArubaSW - fixed parsing of different output for command "show interface all"
  • HP ArubaSW - fixed parsing of different output for command "show interface brief"
  • HP ArubaSW - fixed parsing of different output for command "show vlans ports all detail"
  • HP Comware - fixed parsing of different output for command "display mac-authentication"
  • HP Comware - fixed parsing of different output for command "display isis peer ver <processId>"
  • HP Comware - fixed parsing of different output for command "display clock"
  • HP Comware - fixed parsing of different output for command "display mirroring-group all"
  • HP Comware - fixed parsing of different output for command "display link-aggregation verbose"
  • Juniper Junos - fixed parsing of different output for command "show route active-path"
  • Juniper Junos - fixed parsing of different output for command "show interfaces terse"
  • Juniper Junos - fixed parsing of different output for command "show configuration forwarding-options sampling"
  • Juniper Junos - fixed parsing of different output for command "show configuration interfaces | match sampling | display set"
  • Juniper Junos - fixed parsing of different output for command 'show configuration | display set | except "^deactivate"'
  • Juniper Junos - fixed parsing of different output for command "show route active-path"
  • Juniper - SNMP & Logging parsing fix when deactivated part was in config
  • Juniper - fixed getting ACL from device configuration
  • Juniper Junos - fixed route summary calculations, now corresponds correctly to number of routes in routing table
  • Juniper Junos - BGP summary parsing fix

3.3.3 (10th December 2019)

OVA MD5SUM: 3849bcf518ac89ea987f70af48ed88fa

OVA SHA256SUM: cf360ee8379b73591a1c7790004e11aa49f02f1da5bdaa101a933d251a71f3b5

Visualization

  • Comparison of routing protocols in the graph was fixed - added links were not displayed
  • FIX: OSPFv3 edges weren't displayed

Improvements

  • Snapshot Management - Inventory tab - added column platform
  • Cisco ACI - RIB recursive lookup fix
  • Cisco IOS/XR - RIB to MPLS forwarding for global table improved
  • Cisco MPLS forwarding table parsing updated to better support per VRF aggregate labels

Bug Fixes

  • Discovery didn't work without any configured "enable" password
  • Snapshot locking / unlocking fix
  • Cisco IOS - BDI interface is standardized to BD so all outputs provides same interface name
  • FIX - Discovery process can be stuck (with enabled DNS resolving)
  • Cisco ACI - fixed parsing of different output for command "show vlan extended"
  • Cisco NX-OS - fixed ambiguous command for show routing table
  • Configuration Management worker - if serial number of the device included "/" character then the config file wasn't saved

3.3.2 (28th November 2019)

OVA MD5SUM: 351f8829c6a6d8106519958b60cc3074

OVA SHA256SUM: 422a095b590301074049b489722be1a03729d00401d4d4e73de483c2b12fe82e

Features - Protocol and technology support

  • PortChannel - added support HP ArubaSW
  • New table Management => Discovery History
    • This table shows all discovered devices in history (no matter which snapshot is selected).

Visualization

Improvements

  • Settings - Advanced - System - Clear DB: Don't delete main inventory data table on keep settings option.
  • Pathlookup - Default GW selection - prefer arp entry over virtual address.
  • Pathlookup - Destination site behind transit cloud recognition improvement
  • HP Comware WLC - removed WLAN-DBSS interfaces
  • Snapshot Connectivity report - allow rediscover IP addresses what were excluded or weren't included before
  • Settings / Authentication / credentials list for CLI - added field to exclude specific CIDR ranges
  • Settings / Authentication / credentials list for enable commands - added include / exclude specific CIDR ranges, username

Bug Fixes

  • Management / Changes - the changes could be wrong after ADD or REFRESH actions in that snapshot
  • Diagrams - if the site was opened from network overview diagram then "single point of failure" or "Nonredundant links" didn't work
  • System - Backup - backup to FTP/FTPS server didn't work without directory specification
  • Add devices into snapshot - if the IP addresses were already tried before then it weren't inserted as a new tasks
  • Cisco NX-OS - fixed parsing of different output for command "show interface status err-disable"
  • HP ArubaSW - improved prompt detection
  • HP ArubaSW - MSTP fixed to use only enabled vlans on ports
  • HP ArubaSW - fixed parsing of different output for command "show cdp neighbors detail"
  • HP ArubaSW - fixed parsing of different output for command "show lldp info remote-device <intName>"
  • HP ArubaSW - fixed parsing of different output for command "show lldp info remote-device detail"
  • HP ArubaSW - L2 interfaces - not all interfaces were correctly parsed
  • Juniper Junos - fixed parsing of different output for command "show interfaces statistics detail"

3.3.1 (18th November 2019)

OVA MD5SUM: 962ebf98db27d514ec993a7e8d2c0735

OVA SHA256SUM: 18e5df2c5ab44756d790b47ced322a138a62dc075c81c4fbe4ffcfe786909e17

Features - Protocol and technology support

  • New table Technology => CDP/LLDP => Endpoints neighbors
    • This table shows all endpoints found by XDP protocols.

Improvements

  • TechSupport & Snapshot Download is generated via API jobs and the result (link for download) will be in Jobs menu now.
    • Those links will be there until user confirm it with X button (user can safely reload the page)
  • Allow to save credentials with empty username (for telnet purposes)
  • Discovery remember used protocol now and this protocol is preferred for next discovery (improved speed of discovery)
  • Improved "Save historical data" job which is run after discovery - precalculation of data is much faster now
    • WARNING - all snapshots should be reloaded otherwise you will get false changes in Management / Changes tables.
  • Maintenance page is displayed also during job "Clean DB" - during this time API don't responding to any request returns HTTP status 503
  • Device hostname should be never empty - if command for getting hostname will fail, then we're getting hostname from CLI prompt
  • HP Aruba switches - MSTP mode detection improvement
  • WLC HP Comware - Wireless service interfaces WLAN-DBSS removed from discovery
  • WLC Aruba - Wireless service interfaces Aruba removed from discovery
  • Site Separation using regex - new button for result preview (optimization for big networks)
  • Discovery - processing of small snapshots will be much faster now

Bug Fixes

  • Fix for corrupted CLI log files
  • HP Aruba - hotfix for enable mode (sending enter for Username: prompt)
  • CDP/LLDP - Parsing fix of some AP and IP Phone reported interface. Improved aggregation of multiple CDP & LLDP entries from same device
  • Manual site separation - didn't work correctly for already loaded snapshot
  • Diagrams - fixed Cisco nx7000 wrong icon
  • Fixed cases where UI shown "[object response]" instead of errors
  • Settings - Advanced - System - Clear DB: The jobs weren't correctly rescheduled
  • Arista EOS - fixed Switchport on L2 interfaces
  • Arista EOS - fixed parsing of different output for command "show ntp ass"
  • Arista EOS - fixed parsing of different output for command "show ip dhcp snooping counters debug"
  • Cisco IOS & NX-OS - fixed parsing of different output for command "show ip dhcp snooping binding"
  • Cisco IOS & NX-OS - fixed parsing of different output for command "show ip dhcp snooping statistics"
  • Cisco IOS & NX-OS - “show vlan brief” support for long names and spaces in names added
  • Cisco IOS use "show vlan-switch brief" command (instead of show vlan which gives ambiguous command).
  • Cisco IOS / IOS-XR / IOS-XR - fixed ISIS system type L1/L2
  • Enterasys fixed device prompt detection
  • Enterasys minor fixes regarding CDP & LLDP bindings
  • F5 Big-IP - fixed parsing of different output for command "show cm device"
  • HP ArubaSW - fixed parsing of different output for command "show dhcp-snooping"
  • HP ArubaSW - fixed parsing of different output for command "show spanning-tree detail"
  • HP Comware WLC - client AP mac detection improved so it’s correctly tied to AP
  • Juniper Junos - fixed parsing of different outpur for command "show vlans detail"
  • Mikrotik - fixed parsing of different output for command "/interface print detail"
  • Mikrotik - fixed parsing of different output for command "/ip route print detail"
  • Mikrotik - fixed parsing of different output for command "/system ntp client print"

3.3.0 (4th November 2019)

OVA MD5SUM: 5fe5fbba70252dcc60ed76a33ebb9eed

OVA SHA256SUM: 2dc27c1de2d3bb664359e9906cec80bf685bff0e6cb25c68f0933dfe29867f1c

Features - Protocol and technology support

  • Added support for Mikrotik routers (please read known issue https://ipfabric.atlassian.net/wiki/spaces/ND/pages/735248385/Mikrotik)
  • Added basic support for Enterasys vendor
  • Every snapshot has own settings which can be extended from global settings.
  • SSID Summary table for wireless (Technology / Wireless / Radios/BSSID / SSID Summary)
  • Vlan database collection with new vlan detail and summary tables
    • Technology -> Vlans -> Device Summary - Number of VLANs configured per device
    • Technology -> Vlans -> Device Detail - Detail for specific vlan and device
    • Technology -> Vlans -> Network Summary - List of all vlans configured in network. Grouped by VLAN ID
    • Technology -> Vlans -> Site Summary - List of all vlans configured on the site
  • Collecting information about DHCP snooping
    • Technology -> Security -> DHCP Snooping

Visualization

  • Diagrams - display results from intent verification rules
  • Diagrams - Host to gateway & Pathlookup form - the last used values are remembered
  • Diagrams - Protocols can be expanded / collapsed on double click
  • Performance improvements - loading of graph should be faster
  • Comparing was improved to display changes for edges pointing into transit cloud + changes for interconnected sites edges (If the site have more than 400 ummanaged neighbors then it can't be compared)
  • If transit cloud have more than 100 devices then it can't be expanded.

Improvements

  • Improved network credential management - you can set expiration for credentials, more subnet for individual credential, update password.
  • Cisco ASA - object-groups added support for system pre-defined objects
  • Cisco Nexus - transceivers added to inventory.
  • Settings / Advanced / System - Clear DB - now you can choose if you want to keep settings or restore initial settings.
  • Settings / Advanced / SSH/Telnet - added new option to disable discovery using telnet protocol
  • Settings / Advanced / Maintenance - a new job which is necessary to run on daily to keep the system healthy (The job can be run also manually)
  • Reserverd IPv4 prefixes are automatically excluded from discovery (0.0.0.0/8, 127.0.0.0/8, 224.0.0.0/4, 240.0.0.0/4)
  • Pathlookup - Gateway selection algorithm will consider only /8 and smaller networks.
  • Diagrams - don't navigate into overall network view when leaving or entering pathlookup or host2gateway mode

Bug Fixes

  • Configuration management didn't work correctly from 3.2.0 - the changes in settings wasn't applied without a service restart
  • CLI - pagination text wasn't correctly cleared from CLI output (bug introduced in 3.2.1)
  • Diagrams - options "Show edge" wasn't correctly restored for loaded view
  • Diagrams - The saved views with long names couldn't be deleted
  • Diagrams - Saved view (including ViewBuilder) keep the position of transit cloud
  • Discovery could stuck on stop action when scanner was enabled.
  • LDAP Authentication - new ldap admin didn't have set privileges correctly
  • LDAP Authentication - case sensitivity issue Fixed
  • Certification Authorities - fixed verification if uploaded file is correct certificate
  • Snapshot uploading - the second attempt to upload a snapshot leads to deleting a snapshot from the hard drive.
  • Downloaded snapshot what was later uploaded had a problem that the refresh or add new devices didn't work. Used CLI credentials were sanitized on download, the user is prompted to set new credentials now.
  • Inventory - Interfaces table: IP column, preferring virtual IP as first (previously virtual IP was not shown).
  • Arista EOS - fixed parsing of different output for command "show sflow"
  • Arista EOS - fixed parsing of different output for command "show ntp ass"
  • Arista EOS - fixed parsing of different output for command "show ip arp vrf <vrfName>"
  • Arista EOS - fixed parsing of different output for command "show ip ospf nei det"
  • Arista EOS - fixed parsing of different output for command "show ip ospf interface"
  • F5 - Hostname for both devices in cluster was same. Now it's fixed, each member has correct hostname.
  • F5 Big-IP - fixed parsing of different output for command 'run util bash -c "ntpq -np"'
  • HP Aruba WLC - duplicit client output fixed - it caused that no access point was saved (unique index duplicity)
  • HP Aruba switch - fixed parsing of different output for command "show mac-address"
  • Cisco ASA - fixed parsing of different output for command "show bgp summary"
  • Cisco ASA - fixed parsing of different output for command "show run"
  • Cisco IOS - startup config can be empty fix
  • Cisco IOS - fixed parsing of different output for command "show isis neighbor detail"
  • Cisco IOS - fixed parsing of different output for command "show dot1x all details"
  • Cisco IOS - fixed parsing of different output for command "show interface"
  • Cisco IOS-XR - fixed parsing of different output for command "show inventory all"
  • Cisco IOS-XR - fixed parsing of different output for command "show run"
  • Cisco IOS-XR NCS - inventory, hostname and SN fixes
  • Cisco NX-OS - fixed parsing of different output for command "show logging server"
  • Cisco NX-OS - fixed parsing of different output for command "show inventory"
  • Cisco NX-OS - fixed parsing of different output for command "show interface"
  • Cisco NX-OS - fixed parsing of different output for command "show monitor session all"
  • Cisco NX-OS - RIB HSRP entry removed from RIB edges
  • Dell FTOS - fixed parsing of different output for command "show ip interface"
  • Dell FTOS - fixed parsing of different output for command "show interface"
  • Dell FTOS - fixed parsing of different output for command "show ntp associations"
  • Dell Powerconnect - fixed parsing of different output for command "show interfaces status"
  • Dell Powerconnect - When "show system" hostname is empty, hostname is taken from prompt
  • F5 Big-IP - fixed parsing of different output for command "show sys tmm-info raw"
  • F5 Big-IP - fixed parsing of different output for command "list net trunk all-properties"
  • F5 Big-IP - fixed parsing of different output for command "list sys snmp all-properties"
  • F5 Big-IP - Recursive RIB interface lookup fix
  • F5 Big-IP - IP on L3 interfaces fix
  • F5 Big-IP - Duplicit IP in cluster as RIB nexthop fix (active node IP used)
  • HP Comware - fixed parsing of different output for command " display ip routing-table verbose"
  • Juniper Junos - fixed parsing of different output for command "show ldp neighbor extensive instance <vpnName>"
  • PaloAlto- fixed parsing of different output for command "show system resources"

API Changes

  • Following endpoints have changed 'vlan' column to 'vlanId', next new column added 'vlanName'
    • /tables/spanning-tree/ports
    • /tables/spanning-tree/instances
    • /tables/spanning-tree/topology
    • /tables/spanning-tree/neighbors
    • /tables/spanning-tree/vlans

3.2.1 (19th September 2019)

OVA MD5SUM: 362052f0fc1cecb4c9fefcb0c0cd76e2

OVA SHA256SUM: 237754a2d2594c7ee096c6d90f00a7833bb8f6159e40bb9b5f303b5674d30ce6

Improvements

  • Cisco ACL - added support for more complex rules combining several service object-groups
  • HP Arubasw - LLDP information gathering extended to support switches not supporting “show lldp info remote-device detail” command

Bug Fixes

  • FIXED: Discovery process can be stuck
  • Pathlookup - Object groups on firewalls in path fix
  • Cisco IOS/IOS-XE - netflow version mapping fix
  • Cisco Nexus - Power supply fans are moved from Fans to Power supplies fans tab
  • Extreme XOS- fixed parsing of different output for command "show isis neighbors detail"
  • Juniper EX4300 - fixed parsing for "show version"
  • F5 Big-IP - fixed parsing of different output for command 'run util bash -c "ntpq -np"'
  • F5 Big-IP - fixed parsing of different output for command "run util bash -c uptime"
  • F5 Big-IP - fixed parsing of different output for command "list sys snmp all-properties"
  • Fortinet - NTP task fixed for case when NTP is disabled and command “diagnose sys ntp status“ is not available
  • HP Aruba switch - fixed parsing of different output for command "show system"
  • HP Comware - Interface with lag down state parsing fix
  • HP Comware - fixed parsing of different output for command "display fan"
  • FIXED: Riverbed: Uptime does not consider days, parameter is read incorrectly
  • System - Disk expansion was not working properly in some cases
  • Juniper – Firewall Filters (ACLs) – QoS related actions like loss-priority, forwarding-class or policer are considered to be traffic allowing actions (i.e. permit actions). Actual traffic rate vs. policing max rate is not taken into account anyhow.


3.2.0 (10th September 2019)

OVA MD5SUM: 822ae7794b420242aa0d9db6dd2d62df

OVA SHA256SUM: 03073bc8ecedfac612354a1fbf1695e08808a75366cc433f5fc4d78641c02c60

Features - Protocol and technology support

  • Arista EOS - added support for PortChannel task
  • Cisco ACI - added support for discovering
    • New tables in Technology => SDN => ACI
  • Cisco IOS - Added Flexible flow support
  • Dell FTOS (ver 8 & 9 only) - add support for discovering
  • Dell PowerConnect - add support for discovering
  • Fortinet Fortigate - Added MAC address tables support on transparent VDOMs and software switches
  • HP Aruba switch stacking support added

Visualization

  • Compare feature - allows compare topology changes between snapshots
  • Refresh data directly from the graph:
    • New snapshot from devices in the view - allows you to create a network snapshot containing only devices in the view to quickly refresh data for troubleshooting, path lookup, or other purposes.
    • Refresh devices in the view - refreshes and overwrites collected information in the current snapshot for devices in the view.
    • Add devices into this snapshot - allows adding new devices into current snapshot in the same way as from snapshot management but directly from the diagram.
  • Site separation implemented in graphs - use drag&drop to move devices into new site (use CTRL/SHIFT to select multiple)
  • ViewBuilder
    • Added "expand" icon to add all devices what are connected to parent device
    • Added "collapse" icon to remove all devices what are connected to parent device
    • Multiple devices can be also selected with CTRL or SHIFT holding and those devices can be then added or removed from ViewBuilder view.

Improvements

  • Snapshot management - new snapshot allows to create snapshot with customized global settings
  • Snapshot management - Connectivity report - user can select specific IP addresses to rediscover them (only IP with status "stopped", "error")
  • Size of loaded or unloaded snapshot was decreased
  • Settings - Authentication - Notes can be set per credentials record
  • F5 BGP - devices with Virtual Clustered Multiprocessing (vCMP) should be correctly discovered (fixing error - Device already in queue)
  • HPE WLC - Exclude command 'display irf topology' - it may cause high CPU
  • Host table - removed Juniper’s localhost addresses
  • Zone FW policy processing updated to support multi-zone interfaces

Bug Fixes

  • Snapshot older than 3.1.0 couldn't be loaded
  • Visualization - IS-IS edges wasn't correctly restored for saved views, including ViewBuilder
  • Arista EOS - fixed parsing of different output for command "show vrf"
  • Arista EOS - fixed parsing of different output for command "show ip bgp neighbors vrf all"
  • Arista EOS - fixed parsing of different output for command "show ip roout vrf <vrfName>"
  • Arista EOS - fixed parsing of different output for command "show vxlan address-table"
  • Cisco ASA - fixed parsing of different output for command "show ipv6 interface"
  • Cisco ASA - fixed parsing of different output for command "show route"
  • Cisco ASA - fixed parsing of different output for command "show context"
  • Cisco IOS 2960 NTP sources parsing fix
  • Cisco IOS - fixed parsing of different output for command "show snmp host"
  • Cisco IOS - fixed parsing of different output for command "show ipv6 interface"
  • Cisco IOS - fixed parsing of different output for command "show object-group"
  • Cisco IOS - do not run “show flow interface” command on devices where is no exporter (ambiguous cmd fix).
  • Cisco IOS-XE & IOS-XR MPLS forwarding table parsing fixes
  • Cisco IOS-XE - fixed parsing of different output for command "show ip cef vrf <instance> detail"
  • Cisco NX-OS - fixed parsing of different output for command "show run"
  • Cisco NX-OS - fixed parsing of different output for command "show object-group"
  • Cisco NX-OS - fixed Nexus 5000 interface MTU was wrong due to Cisco bug.
  • Cisco WLC - fixed parsing of different output for command "show run-config commands"
  • Cisco - fixed parsing of different output for command "show snmp user"
  • Checkpoit GAIA - fixed parsing of different output for command "show ospf neighbors detailed"
  • Checkpoit GAIA - fixed parsing of different output for command "fw ctl pstat"
  • Juniper - Corrected BGP neighbor uptime if the uptime is less than 60 minutess
  • Juniper Junos - fixed parsing of different output for command "show vrrp detail"
  • Juniper Junos - fixed parsing of different output for command "show ethernet-switching interfaces"
  • F5 Big-IP - fixed parsing of different output for command "show net trunk all-properties" (unsupported counters units)
  • F5 Big-IP - fixed parsing of different output for command 'run util bash -c "ntpq -np"'
  • F5 Big-IP - fixed parsing of different output for command "show sys hardware"
  • F5 Big-IP fixed get uptime from TMSH
  • Fortinet Fortigate - fixed parsing of different output for command "diagnose sys ntp status" (IPv6 ntp sources)
  • Fortinet Fortigate - fixed parsing of different output for command "show firewall policy"
  • Fortinet Fortigate - fixed parsing of different output for command "show system interface"
  • HP Aruba switch - fixed parsing of different output for command "show tech buffers"
  • HP Aruba switch 2920 modules parsing fix
  • HP Aruba switch inventory parsing fix
  • HP Aruba switch - MST instance interface parsing updated to better detect disabled ports
  • HP Aruba - standalone access points are not supported, will be reported as "Can't detect version" - AP can be discovered only via controllers now
  • Huawei Vrp - fixed parsing of different output for command "display lldp neighbor"
  • Huawei Vrp - fixed parsing of different output for command "display stp"
  • Huawei Vrp - fixed parsing of different output for command "display ntp sessions"
  • Huawei Vrp - fixed parsing of different output for command "display vrrp"
  • Paloalto - fixed parsing of different output for command "show interface <intName>"
  • Paloalto - fixed parsing of different output for command "show routing proto ospf interface"
  • Riverbed - fixed collecting information about memory & device platform
  • STP on portchannel to Cisco VSS fix
  • STP to transit for known neighbors fix
  • STP inconsistency - port vlan mismatch for router to switch connection fix
  • STP inconsistency - Ports with multiple neighbors, fix for Cisco VPC and switch to router connections.
  • STP inconsistency - CDP/STP port mismatch for router to switch connection fix
  • Bad device icon in graph - router with NVI interface is recognized as a router even without #routes > 1
  • RIB recursive lookup - fix for local IP on own interface in RIB when used for recursive lookup
  • Pathlookup - Router to switch connection, multiple next hop with different MAC on one interface fix

Changes

  • Syslog functionality has been reduced for triggering configuration changes only. IP Fabric no longer stores incoming syslog messages due to misalignment with product direction.

API Changes

  • Datatype changed for column vlanId from string to number in following endpoints
    • /tables/addressing/arp
    • /tables/interfaces/inconsistencies/details
  • Datatype changed for column vlan from string to number in following endpoints
    • /tables/addressing/mac
    • /tables/addressing/hosts
    • /tables/reports/capacity/hosts
    • /tables/reports/performance/users
    • /tables/spanning-tree/neighbors
    • /tables/spanning-tree/instances
    • /tables/spanning-tree/ports
    • /tables/spanning-tree/topology
    • /tables/spanning-tree/vlans
  • Routes changes
    • POST /start/discovery was replaced with:
      • POST /snapshots for starting a new discovery / creating a new snapshot
      • POST /snapshots/:key/devices for adding a new device
      • DELETE /snapshots/:key/devices for removing a device

3.1.2 (22nd July 2019)

OVA MD5SUM: 99e9f0518be8cc3a6bc662df89a91617

OVA SHA256SUM: c32f726930ffd80d9433888510315c8ed1d5509a3f70b2f98f34b3cab472ef50


Improvements

  • BGP - Added support for 4-byte ASN
  • User Interface Security - TLSv1.2 is now the only allowed HTTPS protocol
  • Network Assurance Dashboard loading speedup
  • Cisco WLC - Syslog related information is now parsed from “show run-config commands” instead of “show logging” which provided a lot of unnecessary data
  • Fortinet FortiGate - added support for any-any zone firewall policies
  • Juniper memory information is now taken from “show chassis routing“ command instead of “show system memory“
  • F5 BigIp Improved prompt detection
  • Settings - Advanced - SSH/Telnet - Maximum number of parallel sessions can be limited to a single session (Warning: Discovery speed will be extremely slow)
  • Settings - Advanced - SNMP - Added support for multiple SNMP pollers in

Bug Fixes

  • Tables - CSV export - some columns may not have been exported correctly
  • UI - the tooltips sometimes left visible artifacts
  • UI - Inventory / Host table - could crash when it was stored with old settings
  • UI - Fixed selection of an item in the menu - Diagrams / Site Diagrams - Menu Inventory/sites was selected instead of Site Diagrams
  • Building network topology - could fail on deadlock in DB
  • Cisco ASA – ACL to L3 interface mapping fixed
  • Cisco ASA - fixed parsing of different output for command "show route"
  • Juniper – L2 interfaces and STP related information parsing fixed and updated. Command ‘show ethernet-switching interfaces detail’ is no longer used and was substituted by other commands including ‘show ethernet-switching interfaces’.
  • Juniper - discovery failed when root was used as username
  • Juniper VLAN parsing fixed to include even vlans with names starting and ending with double underscores.
  • Juniper - some platform did not correctly set IP as virtual
  • Juniper Junos - fixed parsing of different output for command "show vlans detail"
  • Arista EOS - fixed parsing of different output for command "show lldp neighbors detail"
  • Arista EOS - fixed parsing of different output for command "show interfaces switchport"
  • Extreme XOS - fixed parsing of different output for command "show ospf interface detail enabled"
  • Extreme XOS - fixed parsing of different output for command "show edp ports all detail"
  • Fortinet FortiGate - fixed parsing of different output for command "get router info bgp neighbors"
  • Fortinet FortiGate - fixed parsing of different output for command "diag sys ntp status"
  • Fortinet FortiGate - fixed parsing of different output for command "diag hard dev nic <intName>"
  • Huawei - fixed parsing of different output for command "display bgp <addressFamily> <vpnInstance> peer verbose'"
  • Paloalto - fixed parsing of different output for command "show ntp"
  • Palo Alto - L2 connection to switches fix
  • Palo Alto - routing table parsing fix
  • Palo Alto - L3 connection on cluster fix

3.1.1 (28th June 2019)

OVA MD5SUM: 1c8a3b4de12d9a2a3c15ceea4005080e

OVA SHA256SUM: 138b25ae8b4b1b1f29b6e01a2e15d619a0eddfd610fcbaa042a22a9a8b80f0e0

Bug Fixes

  • Snapshot Management - fixed cloning of snapshot
  • F5 BigIP - improved OS version detection

3.1.0 (27th June 2019)

Features - Protocol and technology support

  • Cisco Firepower Threat Defense - Added basic support
  • Fortinet FortiGate - added support for vDOMs (please follow our KB article)
  • Fortinet FortiGate - added support for Zone Firewall
  • Added PortChannel support for Fortinet/FortiGate (802.11ad only)
  • Added support for OSPF v3 (Cisco).
    • Technology -> Routing -> OSPF v3
  • Added basic support of firewall policies on FortiGate firewalls (UTM security profiles, load balancing, NAT and user auth objects are not supported in this release)

Visualization

  • View Builder - enables to define custom views
  • Added OSPFv3 protocol
  • Improved object manipulation in the diagrams
  • Improved non-redundancy and single point of failure checks in the diagrams
  • Manual site separation replaced the previous method of site separation.

Improvements

  • Snapshot management
    • Discovery page was merged with snapshot management
    • Services logs are now included in the snapshot data file.
    • Added ability to remove devices from the snapshot
  • Added Manual site separation (for now only from table) Inventory => Sites => Manual Separation
  • Host table speed up - the table is pre-calculated in the topology build process
  • The API documentation is now directly in UI
    • Each table has API documentation accessible through the "?" button
  • Improved site separation by regex
    • After regex separation is completed, all devices in the unknown site (not matched by regex) are moved to the site where they are directly connected, if such a connection exists.
  • Backup and restore have been rewritten from scratch. IP Fabric backup now supports incremental backup, local backup to separate datastore, DB restores, snapshot restore and full restore.

  • Added support for IP Fabric appliance monitoring via SNMP (CPU, RAM, storage, network)
  • Advanced Filtering
    • Added new operators "is empty" and "is not empty" to able to filter for empty values
    • Array datatypes is able to specify filtering rules for a specific item in the array or for all items in the array.
  • Path lookup - Protocol menu can now display available protocols according to the path
  • Path lookup - MPLS link type is now based on the presence of label stack
  • Path lookup - routing to connected devices (e.g. for WLC) is improved
  • Discovery - Multiple CLI credentials - system now remember what credentials works and these credentials will be prioritized for next attempt to connect to individual devices.
  • TechSupport file
    • DB dump can be executed only for selected snapshot
  • Technology -> Routing -> IS-IS - added VRF column
  • Technology > Networks > Gateway redundancy - added VRF column
  • Cisco ASA - improved hostname for clusters & contexts
  • Cisco WLC - improved hostname for clusters
  • NTP - Cisco WLC sync unknown state added. NTP summary table now considers the unknown state as reachable and is not reported as a violation

Bug Fixes

  • Host to gateway graph - missing RIB L3 edge to gateway added
  • Host to the gateway - Host was not visible when connected to Cisco FEX
  • Path lookup - Connected routes VRF leak to BGP fixes (don't create RIB edge to transit, a route to connected network with a leak).
  • AP with GLPB gateway - RIB to all forwarders
  • Path lookup - ACL & Zone FW icons weren't displayed on the path
  • Discovery - Summary of Issues - Authentication errors - false/positive reports for this error could be displayed when was used multiple credentials
  • Discovery - Tasker process - fixed include/exclude list, sometime could be discovered IP addresses what wasn't in included or was in excluded list.
  • Juniper Junos - fixed parsing of different output for command "show interfaces statistics detail"
  • Arista EOS - fixed mapping for Task STP - when STP is disabled on the device
  • Arista EOS - fixed parsing of different output for command "show mac address-table"
  • Arista EOS - fixed parsing of different output for command "show lldp neighbors detail"
  • Arista EOS - fixed parsing of different output for command "show ip interfaces"
  • Arista EOS - fixed parsing of different output for command "show ip ospf interface"
  • Arista EOS - fixed parsing of different output for command "show ntp ass"
  • Arista EOS - fixed parsing of different output for command "show vrf"
  • Cisco ASA - fixed parsing of different output for command "show route"
  • Cisco IOS-XE - fixed parsing of different output for command "show isis neighbor detail"
  • Cisco IOS - fixed parsing of different output for command "show environment all"
  • Cisco IOS - fixed parsing of different output for command "show run"
  • Cisco NX-OS - fixed parsing of different output for command "show spa detail"
  • Cisco NX-OS - fixed parsing of different output for command "show flow export"
  • Cisco WLC - fixed mapping for Task WLC Access points lists
  • Cisco WLC - fixed parsing of different output for command "show wlan <wlanId>"
  • Cisco WLC - fixed parsing of different output for command "show ap stats ethernet summary"
  • Cisco WLC - fixed parsing of NTP
  • Extreme XOS - fixed parsing of different output for command "show stpd"
  • Extreme XOS - fixed parsing of different output for command "show log configuration"
  • HP Aruba - fixed parsing of different output for command "show ap debug system-status ap-name <apName>"
  • HP Aruba - fixed parsing of different output for command "show system"
  • HP Aruba - fixed parsing of different output for command "show ap bss-table"
  • HP Comware - fixed parsing of different output for command "display ip interface"
  • Checkpoint Gaia - fixed parsing of different output for command "show ospf neighbors detailed"
  • HP ArubaSW - fixed parsing of different output for command "show spanning-tree debug-counters instance <mstpInstanceId> ports all"
  • F5 BigIP - fixed parsing of different output for command "show cm device"
  • Fortinet FortiGate - fixed parsing of different output for command "diag hard dev nic <intName>"
  • Fortinet FortiGate - fixed parsing of different output for command "get system arp"
  • Juniper Junos - fixed parsing of different output for command "show spanning-tree interface detail"
  • Juniper Junos - fixed parsing of different output for command "show configuration interfaces | match sampling | display set"
  • Juniper Junos - fixed parsing of different output for command "show lacp interfaces"
  • Juniper Junos - fixed parsing of different output for command "show ethernet-switching interface detail"
  • Juniper Junos - fixed parsing of different output for command "show configuration | display set"
  • Juniper Junos - fixed parsing of different output for command "show sflow"
  • Juniper Junos - fixed parsing of different output for command "show lldp neighbors interface <intName>"
  • Juniper Junos - fixed parsing of different output for command "show interfaces statistics detail"
  • Juniper Junos - fixed parsing of different output for command "show configuration forwarding-options sampling"
  • Juniper Junos - fixed parsing of different output for command "show configuration firewall"
  • Site Low-level design report - table Interfaces in the HALF duplex was wrongly reported

3.0.7 (30th April 2019)

Features - Protocol and technology support

  • Extreme/Xos - EDP support added

Improvements

  • MPLS Cisco IOS, XR - VPN aggregate label support added
  • Routing table - VRF leak information added to next hop column
  • Connected routes leaked to other routing protocols are now removed from RIB edges (caused path lookup false routing to transit)
  • Path lookup - Support for VPN aggregate labels added
  • Path lookup - Support for multiple default gw (GLBP)
  • Path lookup - Possible ACL fail on switches with Cisco FEX fixed
  • Host to Gateway - If IP is a network device, show this device only
  • Path lookup - MPLS transit support added. For incoming MPLS interface from transit lookup in MPLS table based on prefix is checked.
  • Cisco IOS-XE - MPLS was not collected for 15.4 version, added

Bug Fixes

  • Manual site separation fixed, it didn't work in certain diagrams.
  • MPLS Cisco IOS - Nexthop mapping fix when only VPN label is present
  • Cisco Blade FEX modules - parsing of FEX related environment information fixed
  • Cisco MPLS forwarding with multiple next-hop including route and label fixed parsing
  • Juniper Junos - fixed parsing issue for command "show vlans detail" - VPLS VLANs aren't supported
  • Juniper Junos - fixed parsing for command "show sflow" when SFlow isn't configured
  • Juniper Junos - fixed parsing of different output for command "show vrrp detail"
  • Juniper Junos - fixed parsing of different output for command "show virtual-chassis device-topology"
  • Juniper Junos - fixed parsing of different output for command "show virtual-chassis vc-port all-members"
  • Juniper Junos - fixed parsing of different output for command "show spanning-tree interface detail"
  • Juniper Junos - fixed parsing of different output for command "show spanning-tree statistics interface"
  • Juniper Junos - fixed parsing of different output for command "show route active-path"
  • Fixed RIB edges with duplicate GLBP addresses for devices without ARP table (AP) or without
  • Checkpoint Gaia - fixed parsing of different output for command "show ospf interfaces detailed"
  • Cisco ASA - fixed parsing of different output for command "show bgp summary"
  • Cisco 6500/7600 routing table parsing fix - some entries were split into a new line in CLI output.
  • Cisco WLC - fixed parsing of different output for command "show port detailed-info"
  • Cisco WLC - fixed parsing of different output for command "show ap config general <apName>"
  • Cisco IOS - fixed parsing of different output for command "show dot1x all details"

3.0.6 (10th April 2019)

Features - Protocol and technology support

  • HP/Aruba switch - STP support added

Improvements

  • UI - Added "Reload required" notification - when the system is updated the UI has to be reloaded. (A manual reload is still required at the moment, use CTRL+SHIFT+R)
  • System and application logs are now available in CLI (/var/log)
  • HP/Aruba switch - improved LLDP protocol parsing & mapping

Bug Fixes

  • FIX Critical BUG - when VM doesn't have a DNS server set, the discovery process can get stuck and a new discovery process can't be started.
  • Hosts table - Host DNS name column was always empty
  • Cisco IOS - fixed parsing of different output for command "show vrrp brief"
  • Cisco NX-OS - fixed parsing of different output for command "show monitor session all"
  • Cisco NX-OS - fixed parsing of different output for command "show flow export"
  • HP/Aruba switch - fixed parsing of different output for command "show lldp info remote-device detail"
  • Path lookup - flooding fix for virtual mac
  • fixed color report results refreshing when multiple snapshots are loaded
  • fixed various color reports patching scenarios (removing a rule, changing a color column)

3.0.5 (2nd April 2019)

Features - Protocol and technology support

  • Added BGP support for Checkpoint Gaia, Cisco ASA, Extreme XOS, Fortinet Fortigate, F5 Big-IP, Huawei VRP, Palo Alto
  • Added ISIS support for Arista EOS, Cisco IOS / IOS-XE / IOS-XR, Extreme XOS, HP Comware, Huawei VRP
  • Added STP support for Extreme XOS
  • Added Routing table support for Cisco WLC

Visualization

  • Path lookup for Wireless clients has been added for Cisco WLC.
  • Path lookup now supports Riverbed in path transparent mode with CDP/LLDP enabled.
  • Protocols menu - added new option "Hide unconnected devices", enabled by default.
  • Position of transit cloud is now correctly stored for loaded view.
  • Path lookup speed has been improved for large networks.
  • Path lookup - Protocol menu - all protocols that are in the path are visible by default.
  • Site separation - RIB edges for default gateway are now displayed automatically.

Discovery

  • Protocol relationship on with the same IP in multiple VRFs is now supported if VRF on both sides matches the name.

Improvements

  • Added version detection for HP1910 and 1950, including switch into CLI mode
  • Improved snapshot loading speed (depending on the number of available CPUs)
  • Spanning tree edge to router links are no longer created based on MAC for multiple destination ports.
  • AP on switch port is now recognized as edge port (based on incoming CDP message).
  • Cisco terminal server router now recognized as a router (based on serial sync/async interfaces), which was previously recognized as host.

Bug Fixes

  • Cisco WLC - fixed parsing of various output for command "show system interfaces"
  • HP Aruba - fixed parsing of various output for command "show inventory"
  • HP Aruba - fixed parsing of various output for command "show ap lldp neighbors"
  • HP Aruba switch - fixed parsing of various output for command "show tech buffers"
  • HP Aruba switch - fixed parsing of various output for command "show ip"
  • HP Aruba switch - fixed parsing of various output for command "show system"
  • HP Aruba switch - fixed parsing of various output for command "show vlans"
  • HP Aruba switch - fixed parsing of various output for command "show interface all"
  • Cisco - fixed parsing of various output for command "show run"
  • Cisco XR - fixed parsing of various output for command "show eigrp vrf all interfaces detail"
  • Arista EOS - fixed parsing of various output for command "show bgp neigh vrf all"
  • Extreme XOS - fixed parsing of various output for command "show ip-fix"
  • Juniper Junos - fixed parsing of various output for command "show spanning-tree interface detail"

Known issues

  • Graphs - Link groups which have more than 25 links (edges) can no longer be un-grouped due to performance impact on the client.

3.0.4 (12th March 2019)

Features - Visualization

  • Host to the gateway - displays only the path by default
  • Path lookup - displays only the path by default
  • Hub messaging is disabled by default
  • LDP & MPLS protocols are now part of the L3 group
  • Window details - external links are removed from tables

Discovery

  • all changes from the latest release v2.4.0 are included now

Improvements

  • Site reports
    • STP domains graph has only STP protocol now
    • Routing domains graph has only L3 protocols
    • Overall site graph - access points were removed
  • Tables - sort by color was removed
  • Tables - filtering using simple filters isn't triggered automatically when you typing, you have to confirm filtering by hitting Enter
  • Tables - filtering is disabled if data loading is still in progress
  • DB indexes optimizations
  • Added support for 802.1x interface monitor mode detection for Cisco IOS/IOS-XE (auth. open)
  • Cisco CDP and LLDP neighbors with the same hostname and IP that are connected through the same local interface are considered to be the same regardless of their interface name
  • Port is now recognized as edge port when network device mac address (without any protocol relations) is associated
  • Cisco Nexus & 6500 - Virtual mac addresses spanning tree edges fix (CDP between switches is required).
  • Device type - Device is recognized as a switch if has mac table and VLANs (previously STP mode was enough)
  • STP domain - Devices without STP edges are not considered as part of STP domain (even when they have some STP mode set).

Bug Fixes

  • Fixed number of total rows in tables
  • Fixed Duplicate IP Table - Don't report GLBP virtual addresses
  • Discovery topology build may fail when WLC device data was refreshed
  • Wireless clients table didn't display data for the selected snapshot
  • Cloned snapshot didn't have wireless clients
  • Changes - Managed IP table was empty
  • Cisco NX fixed parsing of different output for command "show interface fex-fabric"

3.0.3 (22nd February 2019)

Improvements

  • Snapshot with 0 devices aren't automatically deleted (revert)
  • Fixed issue when server has set a proxy then API server can't be reached
  • DB indexes optimizations
  • Discovery - Refresh data for specific devices - access points was removed from table
  • Discovery - Refresh data for specific devices - overide device output in snapshot
  • Discovery - Fixed - Cannot be started when proxy is configured.
  • Initial network configuration wizard - Fixed - NTP configuration hangs.

3.0.2 (19th February 2019)

Improvements

  • API service can fails, because Redis service wasn't started
  • Snaphosts with 0 devices are automatically deleted
  • Automatically remove latest snapshot, when scheduled discovery start fails on not enough disk space
  • Fixed services status in status page
  • Tech Support file - you are able to choose if a snapshot will be included
  • Maximum BW limit changed to 10Mbps

3.0.1 (12th Fabruary 2019)

Improvements

  • Fixed an error in Site Separation by regex
  • Tech Support file now contains CLI logs

3.0.0 Release Candidate 1 (6th Fabruary 2019)

  • A complete overview of network history through individual network "Snapshots"
  • Visualization and analysis for any point in time
  • Discovery page now enables to add devices to a snapshot, refresh devices in a snapshot, or to create a new snapshot.
  • Snapshot management tab enables to download/upload, activate/deactivate, clone or delete snapshots.

The Release Candidate is currently in active development.
The RC1 version is designed to collect feedback about functionality for practical situations, such as making changes, tracking history, creating reference snapshots, and more.
Please post any ideas for improvement to https://ideas.ipfabric.io and in case of any problems contact our support team, either via the https://support.ipfabric.io portal or through support@ipfabric.io.