The discovery process for vendors processed via API can be stuck - fixed
VLAN L3 gateway table - Access points are removed as they produce false-positive gateways
Routing protocols destination interface fix - path lookup multicast routing was broken because of this
The data from global tables are available also when running snapshot is selected
Snapshot attributes are now copied when a snapshot is cloned
Loading a snapshot could sometimes cause an "Unexpected end of JSON input" error and then the snapshot format is corrupted. The root cause has been fixed.
Arista EOS - Fixed false positive error emitting from ”show interfaces vxlan 1”
Azure - fixed mapping of network interfaces without MAC address
Brocade Fastiron - Improved parsing hostname from prompt.
Cisco - fix host table for devices reachable with LISP
Cisco - fixed parsing of PIDs containing plus symbol in cmd “show inventory”
Cisco FTD - commands/cisco/routingTable - fix parsing for null summarized routes.
Cisco IOS - removed text “, wildcard bits“ from texts in standard ACL
Cisco IOS-XE - fix parsing of rebuild version.
Cisco IOS-XE - fix parsing of power supply and fans on Catalyst 9200/9300/9500
Cisco IOS/IOS-XE - Fix transport protocol (telnet) detection.
Cisco NX-OS- fix matching of MAC Addresses interface reference (fabric Path) to real interface.
Cisco NX-OS: add parsing of port-channel interfaces without members.
Cisco Meraki, Juniper Mist, Ruckus - fixed device’s type detection to ensure wireless APs are detected properly
Extreme XOS - Fix parsing of l2Interfaces of missing interfaces.
Fortinet FortiGate - fixed executing of cmd “get system password-policy” on VDOM enabled firewalls
Fortinet FortiGate - Fixed missing FQDN in firewall policies unless configured in lower case
Fortinet Fortigate - fixed parsing of ”get router info ospf nei detail” for NSSA cases
HP Aruba switch - added parsing of port information
HP ArubaCX - Fix parsing of igmp query interval
HP Comware - fixed parsing of “display lldp neighbor-information verbose“
HP Comware - fixed parsing of ”display stp region-configuration” in case vlans list is on multiple lines
Juniper Junos - access-internal routes were removed from routing table
Palo Alto - fix parsing of empty applications/services in security rules
Palo Alto - fixed parsing of ”show high-availability state” for suspended state
Versa VOS - commands/versa/_vos/vnms/dashboard/appliance/sdWanSites - fix mapping for unsupported ipv6 links
Versa VOS - VRRP - Allow virtual IP for instances in 'Init' status
VMware - NSX-T - fixed discovery for T0/T1 routers.
FIX: If Snapshot Settings had stored credentials without username then credentials from the Global setting were taken
Graph - The detail for XDP link between two devices could include records that pointed from one device to the Transit cloud.
Table Management / Changes - fixed export of CSV that didn't work
Table Technology / MPLS / Forwarding - nexthop label 0 value was not previously shown. Fixed now
Arista EOS - Fix parsing of the routing table.
Arista EOS - fix subinterfaces parsing from command ”show ip ospf neighbor detail”
Arista Eos- Fix parsing of command "show lldp neighbors detail".
AWS - Fix mapping of “aws/_ec2/describeRouteTables”
AWS - Fix parsing for a command that shows tunnelOptions which can be empty.
Checkpoint Gaia - Fix parsing for Alias interfaces.
Checkpoint Gaia - Fix parsing for command "show cluster members interfaces all".
Checkpoint Gaia - Fix parsing for empty management interface entry.
CheckPoint Gaia - collect only relevant SNMP configuration according to agent version
Checkpoint Gaia - Fix parsing for command “show ospf interfaces detailed"
CheckPoint Gaia - fixed error when only a virtual IP was assigned on an interface
CheckPoint Gaia - fixed missing zone firewall policies on gateways with VPN tunnel interfaces
CheckPoint Gaia - fixed parsing of physical interfaces from command “show cluster members interfaces all”
Cisco - fixed PID parsing for nonstandard Cisco transceivers from command “show inventory“
Cisco - Fix duplicate entries for lldp and cdp discovery.
Cisco - Fix parsing of nexthop list from routing table
Cisco - IOS/IOS-XE fixed parsing of "show ip mroute count" command
Cisco ASA - the discovery of firewall contexts fixed
Cisco ASA - fixed MTUs and IP addresses parsing on tunnels.
Cisco ASA - fixed parsing of named ip addresses from ”show running-config”
Cisco IOS - add support for portgroups in ACL
Cisco IOS - fix N/A value in current traffic from command “show storm-control“
Cisco IOS - Fix parsing of speed, duplex and tunnel type.
Cisco IOS - fix state when two (current and trap) are outputed in command “show storm-control“
Cisco IOS - fixed parsing of tunnels in case source/destination IP address is missing
Cisco IOS - Remove emitting error for bgp neighbors in state 'idle'
Cisco IOS-XE - Add missing vlanId for the command “show interfaces“.
Cisco IOS-XE - added support for another output format of the ”show env/environment status” command
Cisco IOS-XE - Fix parsing for no transceivers in command "show interfaces transceiver"
Cisco IOS-XE - Fix parsing of interface counters for command "show wireless client mac-address <int> detail"
Cisco IOS-XE - Fixed parsing for virtual IPv6 addresses in command "show standby"
Cisco IOS-XE - Removed PTP related errors throwing in case ”show ptp clock dataset default” does not provide any results
Cisco IOS-XR - commands/cisco/isis/neighborsDetail - fixed parsing with different neighbors format.
Cisco IOS-XR - commands/cisco/routingProtocols/ipRouteSummaryVrf - fixed parsing with different format.
Cisco IOS-XR - Exclude parsing of monitor sessions in L2VPNs.
Cisco IOS-XR - Fix parsing for the command "show bgp all neighbors"
Cisco IOS, IOS-XE - Fix parsing for command "show subscriber session all".
Cisco IOS, IOS-XE, IOS-XR some routes with MPLS label were not used correctly even when next hop is known.
Cisco NX-OS - “show vlan brief” parsing updated to handle error message displayed due to Cisco bug CSCvr88898
Cisco NX-OS - Fix parsing of command "show password strength-check"
Cisco NX-OS - Fix parsing of ospf state for the command "show ip ospf interface vrf all".
Cisco NX-OS - Fixed parsing for negative DHCP snooping values in command "show ip dhcp snooping statistics", probably bug on device.
Cisco NX-OS - fixed parsing of command “show mac address-table“ that were containing fabric path SWID.
Cisco NX-OS - fixed parsing of different output for command “show snmp user”
Cisco viptela - Fix parsing of uptime from command "/device/bfd/sessions?deviceId="
F5 Big-IP - added support for IPv6 NTP source addresses in command 'run util bash -c "ntpq -np"'
F5 Big-IP - commands/f5/_big-ip/showSysHardware - fix parsing various sections of command
F5 Big-IP - Fix parsing of translated ports in command "list /sys sflow receiver all-properties"
F5 BIG-IP 2000 - Fix parsing if the output of the command "list /sys management-ip" is empty.
F5 Big-IP - Fix parsing of invalid interfaces for command "show cm device".
F5 Big-IP fix prompt detection - add the possibility for "(Sync Only)"
Fortinet FortiGate - Added another parsing option of src-filter for command "show firewall VIP".
Fortinet FortiGate - Fix parsing for command "show system ha"
Fortinet Fortigate - Fix parsing for the command "get router info bgp nei”
Fortinet FortiGate - MAC address on link aggregation interfaces could be missing in some cases
HP 3Com - Fix device detection from “display version“ command
HP 3Com - remove ip address reference from directly connected routes.
HP Comware - Added support for tunnel protocol: UDP_ADVPN/IP.
HP Comware - Fix parsing for command "display arp"
HP Comware - Fix parsing for command "display fan"
HP Comware - Fix parsing of BGP peer instance regex for localID.
HP Comware - Fix regex splitting of state and age for command "display ip routing-table verbose".
HP Comware - Fixed parsing of M-Ethernet and TwentyGigE interfaces
HP Comware - fixed parsing of power supplies from command "display power"
HP Comware - Fixed parsing of Route-Aggregation interface in the command "display interfaces".
HP Comware: fix routing relation on own address.
Juniper - fixed parsing firewall rules - added nonterminating actions.
Juniper Junos - Add an exception for infinite values while parsing the command "show interfaces diagnostics optics"
Juniper junos - commands/juniper/_junos/configurationDisplaySet - added from "dscp", "ttl", "is-fragment" (with except actions if applicable) action to firewall parsing.
Juniper junos - commands/juniper/_junos/interfacesStatisticsDetail - fix parsing errors on interfaces - added support for a type of output.
Juniper Junos - commands/juniper/_junos/route - Removed Service to routes, unable to resolve next hop for those routes
Juniper Junos - Fix parsing of no output from command "show sflow"
Juniper Junos - fixed parsing for fans which don't have tray information from command “show chassis environment”
Juniper Junos - fixed parsing of "null" encryption in command ”show security ipsec security-associations detail”
Juniper Junos - improved information parsing of deactivated and protected configuration
Juniper Junos - removed management interfaces with configured ip 18.104.22.168/2 or 10.0.0.1/8
Juniper Junos- fixed parsing of command "show interfaces statistics detail" for logical-unit-number larger than 4095
Paloalto pan-os - commands/paloalto/showConfigPushedSharedPolicyVsys - fixed parsing of none zone in security rule.
Paloalto pan-os - fix services parsing from command "show config merged"
/graphs/png endpoint - the PNG export didn't work - fixed.
Arista EOS - added support for rules with DSCP in command "show ip access-lists"
Arista EOS - fixed parsing of "show ip virtual-router" for another output format
Arista EOS - fixed parsing of interface ranges in command "show ip access-lists summary"
Arista EOS - fixed parsing of logging and snmp information in command "show running-config"
CheckPoint Gaia - fixed missing zone firewall data for VSX clusters
CheckPoint Gaia - fixed version detection for OS versions
CheckPoint Gaia - policy rule was missing if “Install On“ was set to a group object
CheckPoint SMS - fixed processing of nested inline rulebase layers
Cisco - ASA - added support for FWSM detection (support for “show version” command parsing)
Cisco - fixed ACLs parsing in case they contain multiple white characters between keywords
Cisco - QoS fixed parsing for nested child service policies
Cisco IOS - commands/cisco/vxlan/nvePeers - added support for an additional type of "show nve peers" command output
Cisco IOS-XE - Added exclusion for ACL rule "system-cpp-energywise-disc" containing bug (CSCue04444) in "show ip access-list"
Cisco IOS-XE - fixed parsing of assigned ACLs from "show ip interface" command in case of different output format
Cisco IOS-XE - fixed parsing of recursive routes with MPLS label.
Cisco IOS/IOS-XE - routing table - added support for ICMP redirects and filtering out of "possibly down" routes
Cisco NX-OS - an icon of Nexus 9000 changed to match the icon of Nexus 7000.
Fixed advanced filtering in Snapshot Management / Inventory table (OR condition didn't work)
Fixed Interface edge classification for tunnel interfaces.
Fixed PNG export for graphs via API request
Fortinet FortiGate - fixed empty MAC table
HP ArubaCX - added support for another output format of command "show interface"
HP ArubaCX - added support for another output format of command "show ip ospf neighbor detail"
HP ArubaCX - Added support for task "vrf"
HP ArubaCX - Fix parsing for command "show ip route all-vrfs"
HP ArubaCX - fixed parsing of platform in command "show system"
Path lookup - ACI and firewall routing to duplicate IP addresses fix.
Router to switch L2 edges - same mac on multiple interfaces fix
Table Management / Changes - the column "#IP Addresses" had always 0 as a value - fixed
Versa - standardize duplex values
Fix for snapshot clone process in a stuck state
Site separation - preview results now respect transformation settings.
Snapshot Management - fixed empty status of the snapshot
Table component - "Reset table settings" didn't work - fixed
The toggle "Allow using telnet protocol" didn't work - fixed
Transceivers statistics table - delta column calculation fix
Arista EOS - /commands/arista/_eos/switchport - full cmd syntax used to prevent ambiguous command errors
Arista EOS - add support for another format output of the "show poe" command
Arista EOS - ARP in some cases was not parsed whole interface name for ARP record
Arista EOS - fixed false-positive error regarding VPN/VRF in "show ip interface" command
Arista EOS - fixed missing IP phones on some devices
Arista EOS - fixed parsing of "show interfaces vxlan 1" for interfaces with description
Arista EOS - fixed parsing of “show ip route” command in case VRF Leaks are in it
Arista EOS - fixed parsing of different output for command "show mlag detail"
Arista EOS - fixed parsing of different output for command "show ntp ass"
Arista EOS - Syslog - information is parsed from “show running-config” instead of “show logging”
Aruba CX - commands/arubacx/interface - fixed parsing for ip address / mask
Aruba switch - standardize port speed units with other vendors
Checkpoint Gaia - commands/checkpoint/_gaia/cluster/members/interfacesAll - fixed parsing for different command output
CheckPoint Gaia - fixed collecting of nested network / service groups in security policies
CheckPoint Gaia - fixed discovery on devices where the command "show management interface" is not available
CheckPoint Gaia - fixed parsing of different output for command "show cluster members interfaces all"
CheckPoint Gaia - fixed parsing of OSPF InterArea and External routes
CheckPoint Gaia (Security Management) - don’t download policy packages without configured installation target
Cisco - fix error created by calling ambiguous command (show interface switchport, show interface status err-disabled, show ip interface, show spanning-tree bpdu)
Cisco - fixed ambiguous command "sh mpl interf" by "show mpls interfaces"
Cisco - fixed parsing of commands “show mac address-table multicast“ and “show mac-address-table multicast“ for cases there are unexpected lines at the beginning of the output
Cisco - Fixed parsing of VRF Route-Targets in an IP format
Cisco - various platforms - suppress error messages when tunnel present on port.
Cisco ACI - fixed parsing of 'inherit' speed value from "show interface" command
Cisco ACI, NX-OS - fixed parsing of "show environment" command in case power supply’s column model is empty
Cisco HSRP - fixed preemption
Cisco IOS - add stacking support for catalyst 2960-s platform
Cisco IOS - commands/cisco/mcast/macMulticast - add parsing support for MAC table records with multiple interfaces per row
Cisco IOS - commands/cisco/mcast/pimNeighbor - fixed missing PIM version & different output structure on old IOS version
Cisco IOS - commands/cisco/vrrp - fixed parsing of preempt parameter
Cisco IOS - Fixed parsing for AAA section from running config.
Cisco IOS - fixed parsing of "show power inline" command for cases of empty device name
Cisco IOS - fixed parsing of ”show version” command in case of faulty master switch
Cisco IOS - Fixed parsing of command "sh ip mroute vrf <vrfName>" that would get translated by the DNS server
Cisco IOS - fixed parsing of command ”show ip igmp snooping groups” in case port list does not contain any interface for a group
Cisco IOS - fixed parsing of the different output for command "show ip flow export command"
Cisco IOS - fixed parsing of the different output format of command “show ip mroute count“
Cisco IOS - removed false positive error emitting in "show monitor detail" command
Cisco IOS - tasks/deviceConfig/current - allow empty configuration when device return it
Cisco IOS + IOS-XE - fixed false-positive error detection in command “show dot1x all details“ in case of Tacacs session expiration.
Cisco IOS cat9300 - commands/cisco/vxlan/nveVni - fixed parsing for new command output format
Cisco IOS-XE - added parsing of another format of "show env all" and "show env status"
Cisco IOS-XE - Fixed parsing of command “show interfaces transceiver detail“ for another output format
Cisco IOS-XE fixed parsing of "show environment all" command for devices with multiple PSU
Cisco IOS-XR - ACL add suport for networks in CIDR format
Cisco IOS-XR - fixed parsing for dot1x interfaces configured as authenticator and supplicant
Cisco IOS-XR - Removed backup (FRR) routes from routing tables.
Cisco IOS-XRv - fixed platform, model and uptime parsing
Cisco IOS/IOS-XE - fixed parsing of “CVTA phone port” and “Two-port Mac Relay“ CDP capabilities
Cisco ISA - commands/_osVersions/showVersion - fixed parsing of ISA platform
Cisco Meraki - API v0 input validation updated for endpoint switch-ports/get-device-switch-port-statuses
Cisco Meraki - commands/cisco/_meraki/v0/devices/switch/ports - Unexpected stp guard value: root guard.
Cisco Meraki - fixed parsing of Meraki device clients.
Cisco Nexus - commands/cisco/mac - Added support for FabricPath MAC entries
Cisco Nexus - commands/cisco/switchport - fix parsing for VLAN ID ranges that are split over multiple lines
Cisco Nexus - fixed parsing of ”show policy-map system type network-qos” command to support another output format
Cisco Nexus - "show environment fex all" cmd - added support of "absent" PSU parsing
Cisco Nexus - added parsing of another output format of "show logging server” command
Cisco Nexus - fixed parsing of FEX environment information
Cisco Nexus - fixed parsing of in/out bytes, multicasts and broadcasts from "show interface" command
Cisco Nexus - Fixed parsing of STP port status on STP broken ports.
Cisco Nexus, ACI - fixed Device Mode value for FEX devices in Technology/Platforms/Environment
Cisco nx9000-aci - commands/cisco/igmp/group - Group IP parsing fix
Cisco SG - commands/_osVersions/showVersion - Add OS discovery support for cisco Sg220.
Dell Powerconnect - added MTU and MAC for interfaces
Dell Powerconnect - fixed parsing of MAC address from “show interfaces“ command
Dell Powerconnect - fixed parsing of speed and duplex from “show interfaces status“ command to support also N/A and unknown values
Dell Powerconnect n1500 - Fixed parsing for the command "show spanning-tree detail".
Duplicate IP table - false-positive unnumbered IP removed
Extreme XOS - added support for another output format of "show sharing" command
Extreme XOS - “show ports transceiver information detail“ fixed parsing of -infinity value
Extreme XOS - fixed parsing of port names for "show stpd <stpdDomain> ports counters" command
Extreme Enterasys - tasks/portChannel - port state fix
Extreme XOS - Fixed parsing of command 'show ip-security dhcp-snooping vlan' to allow more or none ports in Trusted ports section
Extreme XOS - fixed parsing of command “show ports transceiver information detail“ to allow transceivers without any statistics
F5 - commands/f5/_big-ip/listNetSelf - add support of ipv6 addresses
F5 BigIP - fixed parsing of Cluster members if they dont have Failover Unicast configured.
Fortinet FortiGate - commands/fortinet/diagSysNtpStatus - fixed parsing if all configured servers are unresolved
Fortinet FortiGate - fixed parsing of "get system status" command for FortiGateRugged platform to allow IPF device discovery
Fortinet FortiGate - LLDP link wasn’t established for HA ports
Fortinet FortiGate - Routed port classification fix for L2 edges
HP Aruba - commands/_osVersions/showVersion - fixed parsing for Aruba Mobility Master and Mobility Controller.
HP Aruba - Mobility Master - platform and LLDP parsing fixed
HP Aruba 7200 - Fix parsing for APs that dont respond to "show ap debug system-status ap-name <apName> command".
HP Aruba CX - fixed memory parsing
HP Aruba CX - fixed parsing for "show vsx brief" with state in sync-primary
HP Aruba CX - fixed parsing of "show interface" command with different output structure
HP Aruba CX - fixed parsing of different output for command "show vsx status"
HP Aruba CX - fixed parsing of property LAST in command "show ntp association"
HP Aruba S3500-24P - commands/hp/_aruba/inventory - Fixed parsing of serial number for Aruba switch.
HP Aruba switch - added parsing of the different output format of ”show tech buffers” command
HP Aruba switch - fixed parsing of different output for command "show spanning-tree"
HP Aruba switch - fixed STP task mapping for RPVST for cases designated bridge ID is missing.
HP ArubaCX - fix parsing of "show ip ospf neighbor detail" command in case priority is missing
HP ArubaCX - fix parsing of command 'show ip ospf interface' for cases local IP address is missing
HP ArubaCX - fix parsing of command 'show ip ospf interface' from Aruba OS version 10.07 and higher
HP ArubaCX - fixed parsing of "show interface mgmt" in case mgmt interface is disabled
HP ArubaCX - fixed parsing of "show ip ospf interface all-vrfs" and "show ip ospf neighbor detail" to not change VRF name to lower case
HP ArubaCX - fixed uptime parsing (it isn't always provided)
HP Comware - added support for another output format of “display arp“ command
HP Comware - fixed parsing of "display fan" command for the different output format
HP Comware - fixed parsing of "display ip interface" command
HP Comware - fixed parsing of "display power" command for the different output format
HP Comware - fixed parsing of “display ospf interface verbose“ command to support multiple areas for process ID and removed false positive error emitting in case there is configured process without any area
HP Comware - fixed parsing of commands with large output (added cli clearing for Comware 3 format)
HP Comware - tasks/l2Interfaces - fixed mapping of interfaces in case trunk doesn't contain any permitted vlans
HP Comware 5130 - commands/hp/_comware/currentConfiguration - AAA scheme fixed parsing for test-profile in aaa server configuration
Juniper Junes - fixed parsing of different output for command "show configuration | display set”
Juniper Junos - added parsing for another output format of command “show lldp neighbor“
Juniper Junos - fixed false-positive error emitting in STP task for STP disabled interfaces
Juniper Junos - fixed mapping of stacking for cases switch is not present (disconnected)
Juniper Junos - fixed parsing of "show chassis environment" command to support different output format of fans
Juniper Junos - fixed parsing of "show route" command for discarded routes
Juniper Junos - fixed parsing of "show vrrp detail" command in case "version" is missing
Juniper Junos - Fixed parsing of LLDP neighbors.
Juniper Junos - fixed parsing of the routing table to parse correctly Administrative Distance and Metric
Juniper Junos - fixed parsing of secondary address for command "show interfaces statistics detail"
Juniper Junos - removed duplicates in the routing table
Mikrotik RB1100 - Fixed parsing for command "ip ipsec installed-sa print detail"
Mikrotik RouterOS - fixed parsing of IP addresses of actual-interface in command 'ip address print detail'
Palo Alto - fixed parsing of different output for command "show routing route"
Palo Alto, F5 clusters - Fix for establishing routing protocol edges
Paloalto - fixed parsing for the routing table.
PaloAlto 5200 - commands/paloalto/showConfigMerged - fix parsing, when vsys has no configuration
Pathlookup - STP edge between switch and firewall in a cluster with virtual mac fix
Routing table recursive lookup for VXLAN and other forwarding properties fix
STP topology fix for port role master
Versa VOS - Fixed BGP task mapping for cases total received Pfx is not available.
Versa VOS - fixed mapping of API endpoint "/vnms/dashboard/appliance/<appliance>/live?command=ospf/interface/int-extensive"
Wrong MAC address classification as a phone for proxy ARP fix.