Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note

Please bear in mind, that once the connection is established, it will be enabled permanently, until disabled or removed! If there are any network issues, IP Fabric software will try to establish connection periodically.

Note

At least one seed IP address has to be provided as a starting point behind Jumphost in seed configuration.

Setting up Jumphost

  1. Open jumphost settings, using item Settings → Advanced → SSH/TELNET

  2. On the bottom of the page, please select Add button

  3. Fill in all necessary data

    1. Label - the name for configuration (mandatory)

    2. Jumphost Address - IP address of fqdn name (mandatory)

    3. IPv4 subnets - subnet in CIDR representation, allows adding more than open, separated with spaces (mandatory)

    4. Exclude IPv4 subnets - subnet to exclude in CIDR representation, allows to add more than open, separated with spaces (optional)

    5. Login type

      1. Use credentials - require to provide username and password

      2. Use SSH keys - if you copied ssh public key to the proxy server, it won’t require providing a password (please jump to SSH key configuration section)

    6. Username - username for authentication (mandatory)

    7. Password - password for authentication (mandatory if ‘Use credentials’ is used)

      i.e., refer to picture below

  4. Click Add button

  5. If a connection is open, you will see the Running status in Jumphost list

...